Metrohm 719 S Titrino - Manual (Página 87)

3.2 Remote control commands
719 S Titrino
83
Selection of the balance type and the signal at the analog output.
3.2.2.42. Config.Aux.Language english, deutsch, francais, espanol,
italiano, portugese, svenska
Selection of the dialog language.
3.2.2.43. Config.Aux.Set $G
Config.Aux.Set.Date YYYY-MM-DD
Config.Aux.Set.Time HH:MM
Date and time.
Input format of the date: Year-month-day, two-digit, enter leading zeros.
Input format for the time: Hours:minutes, two-digit, enter leading zeros.
Date and time have to be set with &Config.Aux.Set $G just after entry of the
value.
3.2.2.44. Config.Aux.RunNo 0...9999
Current sample number.
Set to 0 on power on and initialization. After 9999, counting starts again at 0.
3.2.2.45. Config.Aux.AutoStart 1...9999, OFF
Number of automatic, internal starts.
3.2.2.46. Config.Aux.StartDelay 0...999 999
Start delay time in s. During this time, the data of the preceding determination
are retained.
3.2.2.47. Config.Aux.DevName up to 8 ASCII characters
Name of the instrument for connections with several units. It is advisable to
use only the letters A...Z (ASCII No. 65...90), a...z (ASCII No. 97...122) and
the numbers 0...9 (ASCII No. 48...57) when the function Setup.AutoInfo
(3.2.2.86) is used at the same time.
If a name has been entered, it will be printed out in the result report (full,
short).
3.2.2.48. Config.Aux.Prog read only
Output of the program version.
The Titrino sends "719.0021" on requests with $Q.
3.2.2.49. Config.RSSet $G
Config.RSSet.Baud 300, 600, 1200, 2400, 4800, 9600
Config.RSSet.DataBit 7, 8
Config.RSSet.StopBit 1, 2
Config.RSSet.Parity even, odd, none
Config.RSSet.Handsh HWs, HWf, SWchar, SWline, none