Metrohm 719 S Titrino - Manual (Página 63)

3.1 General rules
719 S Titrino
59
Status conditions of the global $C:
The status conditions of the global $C are identical with the ones of the global
status $G. They appear when the process has been restarted actively from the
status "Hold" ($C, key <meas/hold> or automatically after elimination of an
error).
Status conditions of the global $R:
$R .Mode.XXXX.QuickMeas:
Quick manual measurement from the initial status in mode XXXX.
$R .Mode.SET .Inac:
Instrument in the SET mode, inactive.
.Cond.Ok:
Instrument in the SET mode, conditioning, endpoint reached.
.Cond.Prog:
Instrument in the SET mode, conditioning, endpoint not reached.
$R .Mode.MEAS .Inac:
Instrument in the MEAS mode, inactive.
$R .Mode.CAL .Inac:
Instrument in the CAL mode, inactive.
$R .Assembly.Bur.ModeDis:
Buret in the DIS mode, inactive.
Status conditions of the global $S:
$S .Mode.XXXX.QuickMeas:
Quick manual measurement from the initial status in mode XXXX.
The instrument gives the status from which it has been stopped. The detailed
status information is therefore identical to for the global status $G.
Violation of monitored limits with action "end" give the status message
$S.Mode.XXX.Inac;EYYY.