Metrohm 774 Oven Sample Processor - Manual (Página 128)

5 Descripción detallada
5.11.4 &Setup …
5.11.4.1 Setup.IdReport on, off
Switching on/off the transmission of report identifiers.
5.11.4.2 Setup.Keycode on, off
Switching on/off the automatic transmission of keys pressed. Example:
when the <START> key is pressed, the Sample Changer sends: #3
Table of key codes:
Code Key Code Key
1 <HOLD / LEARN> 16 <7 / SAMPLE>
2 <STOP> 17 <4 / PUMP>
3 <START> 18 <1 / SCAN>
4 <CONFIG> 19 <0 / DEF>
5 <PARAM> 20 <END>
6 <USER
METHOD> 21 <Î>
7 22 <CLEAR / RESET>
8 <9 / LIFT> 23 <ENTER>
9 <6 / DOS> 24 <Ï>
10 <3 / WAIT> 25 <Ð>
11 <∗ / ENDSEQ> 26 <SELECT / TOWER>
12 <8 / MOVE> 27 <QUIT>
13 <5 / STIR> 28 <HOME>
14 <2 / CTRL> 29 <Í>
15 <. / PRINT> 30 <INSERT >
31 <DELETE>
5.11.4.3 Setup.Tree.Short on, off
Setup.ChangedOnly on, off
Definition of the type of answer to $Q.
.Short:
With "on", each path is sent with only the amount of
characters in order to be unequivocal (printed bold in
this manual).
.ChangedOnly: Sends only the changed values, i.e. values that have
been edited. All paths are sent absolute, i.e. from the
root &.
5.11.4.4 Setup.Trace on, off
The instrument automatically reports when a value has been confirmed with
<ENTER>. Message, e.g. &Config.Aux.Language"english"
The beginning of the message is marked with a space (ASCII 32).
5.11.4.5 Setup.Lock.Keyboard on, off
Setup.Lock.Config on, off
Setup.Lock.Parameter on, off
Setup.Lock.UserMeth.Recall on, off
Setup.Lock.UserMeth.Store on, off
Setup.Lock.UserMeth.Delete on, off
Setup.Lock.Display on, off
"on" means disable the corresponding function.
774 Oven Sample Processor, Instrucciones para el uso 122