1 location of the appliance, 2 levelling, 3 anti-tilt protection – AEG 47056VS-MN Benutzerhandbuch

Seite 29: 4 electrical installation

Advertising
background image

Dimensions

Depth

600 mm

Oven capacity

74 l

Voltage

230 V

Frequency

50 Hz

13.1 Location of the appliance

You can install your freestanding appli-
ance with cabinets on one or two sides
and in the corner.

A

A

B

Minimum distances

Dimen-

sion

mm

A

2

B

685

13.2 Levelling

Use small feet on the bottom of appli-
ance to set the appliance top surface
level with other surfaces.

13.3 Anti-tilt protection

CAUTION!
You must install the anti-tilt pro-
tection. If you do not install it,
the appliance can tilt.

Make sure you install the anti-tilt
protection at the correct height.

1.

Set the correct height and area for
the appliance before you attach the
anti-tilt protection.

2.

Install the anti-tilt protection 77 mm
down from the top surface of the ap-
pliance and 49 mm from the left side
of the appliance into the circular
hole on a bracket (see fig.). Screw it
into the solid material or use appli-
cable reinforcement (wall).

3.

You can find the hole on the left side
on the back of the appliance (see
fig.).
Lift the front of the appliance (1) and
put it in the middle of the space be-
tween the cupboards (2). If the space
between the bench cupboards is
larger than the width of the appli-
ance, you must adjust the side meas-
urement to centre the appliance.
Make sure that the surface behind
the appliance is smooth.

1

2

49 mm

77 mm

13.4 Electrical installation

The manufacturer is not responsi-
ble if you do not follow the safety
precautions from the chapter
"Safety information".

ENGLISH

29

Advertising