AEG 47056VS-MN - Handbuch (Seite 11)

8. OVEN - CLOCK FUNCTIONS
8.1 Electronic programmer
hr min
1 2 1
3 4 5
1
Function indicators
2
Time display
3
Button +
4
Selection button
5
Button -
Clock function Application
Time of day To set, change or check the time of day.
Minute Minder To set a countdown time. This function has no effect
on the operation of the oven.
Duration To set how long the appliance must operate.
End To set when the appliance must be deactivated.
You can use Duration and End at
the same time to set the time
when the appliance must be acti-
vated and then deactivated. First
set Duration, then End.
8.2 Setting the clock functions
1. For Duration and End , set an
oven function and temperature. This
is not necessary for the Minute
Minder
.
2. Press the Selection button again and
again until the indicator for the nec-
essary clock function flashes.
hr min hr min
3. Press + or - to set the necessary
clock function.
The display shows the indicator for
the clock function you set. When the
set time ends, the indicator flashes
and an acoustic signal sounds for
two minutes.
With the Duration and End
functions, the appliance deacti-
vates automatically.
4. Press a button to stop the signal.
5. Turn the knob for the oven functions
and the knob for the temperature to
the off position.
8.3 Cancelling the clock
functions
1. Press the Selection button again and
again until the necessary function in-
dicator flashes.
2. Press and hold the button -.
The clock function goes out after
some seconds.
ENGLISH
11