BMW Motorrad K1300S - Manual (Page 128)

Press bulb 2 into socket and
turn counterclockwise to re-
move.
Replace defective bulb.
Bulbs for flashing turn
indicators, rear
R10W / 12 V / 10 W
Press bulb 2 into fitting and
install turning clockwise.
Insert lamp glass in turn indica-
tor housing.
Install screw 1.
Diode rear light
If more LEDs have burned out
in the tail light than are indicated
in the Technical Data below, the
tail light bulb must be replaced.In
this case:
Contact a specialized work-
shop, preferably an authorized
BMW Motorrad retailer.
Maximum number of de-
fective LEDs in taillight
1 (Brake light/taillight (red))
1 (License plate light (white))
8
124
z Maintenance