General instructions, Onboard socket – BMW Motorrad K1300S User Manual

Page 96

Advertising
background image

General instructions

BMW Motorrad recommends
the use of parts and accessories
for your motorcycle that are ap-
proved by BMW for this purpose.
Your authorized BMW Motorrad
retailer is the right place to go
for genuine BMW parts and ac-
cessories,other BMW-approved
products, and expert advice on
their installation and use.
These parts and products have
been tested by BMW for safety,
function and suitability. BMW
accepts product liability for these
products.
Conversely, BMW is unable to
accept any liability whatsoever
for parts and accessories which it
has not approved.

BMW Motorrad cannot ex-
amine or test each product

of outside origin to ensure that it
can be used on or in connection
with BMW motorcycles without

constituting a safety hazard. Nor
is this guarantee provided when
the official approval of a specific
country has been granted. Tests
conducted by these instances
cannot make provision for all op-
erating conditions experienced by
BMW motorcycles and, conse-
quently, they are not sufficient in
some circumstances.
Use only parts and accessories
approved by BMW for your
motorcycle.
Whenever you are planning mod-
ifications, comply with all the le-
gal requirements. The motorcy-
cle must not infringe on national
road-vehicle construction and
use regulations.

Onboard socket

Ratings

The supply to the socket 1 is cut
off automatically if battery voltage
is too low or the load exceeds
the maximum rating.

Operating electrical
accessories

You can start using electrical ac-
cessories only when the ignition
is switched on. The accessory
remains operational if the igni-
tion is subsequently switched off.
Approx. 15 minutes after switch-
ing off the ignition and/or during

7

92

z

Accessories

Advertising