Tire pressure control rdc – BMW Motorrad K1300S User Manual

Page 58

Advertising
background image

reason the range is only calculat-
ed while driving.

The determined range is an
approximate reading. BMW

Motorrad therefore recommends
that you do not try to use the full
range before refueling.

Oil level indicator

The oil level indicator 1 provides
information on the oil level in the
engine. It can only be displayed
when the motorcycle is stopped.

The conditions for the oil level
indicator are as follows:

Engine at operating tempera-
ture.
Engine idling for at least 10
seconds.
Side-stand retracted.
Motorcycle is vertical.

The readings mean:

OK

: Oil level correct.

CHECK

: Check oil level during

next refueling stop.

If other information of the
onboard computer is dis-

played, this symbol continues to
be shown until the oil level is de-
tected as correct again.

---

: No measurement possible

(above-mentioned conditions not
met).

The most recently measured lev-
el is displayed for five seconds
when you next switch on the ig-
nition.

Should, despite a correct oil
level on the display of the

engine oil reservoir, "Check oil
level" appear continuously in the
display, the oil level sensor may
be defective. In this case, please
contact your authorized BMW
Motorrad retailer.

Tire Pressure Control
RDC

with Tire Pressure Control
(TPC/RDC)

OE

Displaying tire inflation
pressure

Switch on the ignition.

4

54

z

Operation

Advertising