BMW Motorrad K1300S User Manual

Page 114

Advertising
background image

Push brake pads 3 apart
slightly by rocking the brake
caliper 4 back and forth against
the brake disk 5.
Carefully pull brake calipers
back and out until clear of
brake disks.
When pulling off left brake
caliper, make sure that ABS
sensor cable is not damaged.

Remove screw 1 and take ABS
sensor out of hole.

without center stand

OA

Place motorcycle on an auxil-
iary stand; BMW Motorrad rec-
ommends BMW Motorrad rear
wheel stand.
Installing rear-wheel stand
(

117).

with center stand

OA

Make sure ground is level and
firm and place motorcycle on
its center stand.

Raise front of motorcycle until
the front wheel can turn freely.
BMW Motorrad recommends
the BMW Motorrad front-wheel
stand for lifting the motorcycle.
Fitting front wheel stand
(

116).

The left axle clamping
screw fixes the threaded

bush in place in the front
suspension. A poorly aligned
threaded bush results in incorrect
spacing between the ABS sensor
ring and the ABS sensor, and
therefor to ABS malfunctions or
destruction of the ABS sensor.

8

110

z

Maintenance

Advertising