SENAO EnGenius EP-801 - Manual (Page 27)

~53~
When using headset, to avoid missing the call due to the ringer emitted from
receiver of headset, you can change the ringer emitting from either handset
speaker or receiver of headset.
a.
Press MENU (Right) soft key while the handset is in the standby
mode.
b. Press “5” (Phone Settings), followed by “9” to enter the “Headset
Ring” menu.
c. Select “On”, the ringer will be emitted from the receiver of headset;
If select “Off”, the ringer will be emitted from handset speaker.
Baby Monitor
You can set any one handset as a “baby unit” to monitor the movement of
baby or older person.
When enabling the baby monitor, the “baby unit” will automatically enter the
monitoring mode via 2-way intercom.
For example, if setting handset A as a “baby unit”, when making an intercom
call from handset B, the handset A will automatically enter monitoring mode
without ringing; Also you can hear the all movements around the handset A
via the handset B.
a.
Press MENU (Right) soft key while the handset is in the standby
mode.
b. Press “4” (Call Settings), followed by “5” to enter the “Baby
Monitor” menu.
c. Press “CHANGE” to switch ON or OFF (default is OFF).
Re: To avoid any disturbance, during the monitoring, the dedicated
handset will not answer any incoming call, except the intercom.
~54~
Menu Operations