SENAO EnGenius EP-801 User Manual

Page 17

Advertising
background image


~33~

turned off. Press

to answer the intercom call.


2. If the handset is on the charger cradle (ringer will be

temporarily switched to “Ring” if it has been set to
“Vibrate”), lift the handset and start conversation.

Ending a Call


A. from Handset
To end a telephone or intercom call, press

key, or place handset into

charger cradle.

B. from Base
To end a telephone call, press

key. To end a intercom call, press

key.

Adjusting Handset Receiver (Earpiece) Voice Volume

1. Voice volume can only be adjusted during a call.

2. There are 6 levels of volume selections. Use

or

key to adjust

3. The new setting remains effective for all future calls

until changed.

00:00:15
Volume: 3

11

MUTE

OPTION

1


Adjusting Handset Speakerphone Voice Volume

1. Voice volume can only be adjusted during a call (in

speakerphone mode).

2. There are 6 levels of volume selections. Use

or

key to adjust

3. The new setting remains effective for all future calls

until changed.



~34~

Adjusting Base Speakerphone Voice Volume

1. Voice volume can only be adjusted during a call.

2. There are 6 levels of volume selections. Use

or

key to

adjust.

3. The new setting remains effective for all future calls until changed.

Placing a Call On Hold

1. When a call is in progress, it can be put on hold by

pressing the

key.

2. To return to the conversation, press

UNHOLD

(Left)

soft key

Notes:

1. The call being placed on hold can be “un-hold” by the handset

that puts it on hold. But if the handset press

key to go back

standby, then other handsets can press

or

to pick

this held call (If press

on base, it can also pick up this held

call).

2. Handset LCD displays a call is being on hold. An alert tone

(double beep) every 30 seconds will remind the handset that a
call is being on hold.

3. If the operation (e.g., call transfer) after putting a call on-hold

fails, the held call may be dropped.

3. When a call is in progress via base, it can be put on hold by pressing the

key.

4. To return to the conversation, press

or

key.


Mute

1. After a link is established, you can press

MUTE

(Left)

soft key to mute the handset microphone.

2. When mute is active, the other end will not hear your

voice, but still can speak to you.

Advertising