SENAO EnGenius EP-801 - Manual (Page 7)

~13~
16-character names, and Date/Time stamp), needs Caller ID service
from local telephone company.
c. Phone numbers and names can be saved into phonebook while in
display.
8. Call Barring: Block outgoing call and incoming call.
a.
Outgoing call:
a-1. Block the users from dialing long distance calls or international
calls
a-2. Up to 5 digits of each call barring setting; up to 5 entries
allowed.
a-3. If you need to dial a specific number to retrieve the dial tone,
you need to key in that number while setting the call barring
b. Incoming call:
b-1. PA On/Off: Enable or disable the broadcast from other handsets
or base. When PA is Off, the handset can’t receive broadcast from
base or other registered handsets, but it can broadcast to base or
other registered handsets.
b-2. Line On/Off: Enable or disable the capability to receive incoming
call from telephone line. When Line is Off, the handset can’t receive
incoming call from telephone line, but it can still make outgoing call.
b-3. Int. On/Off: Enable or disable the intercom from other handsets
or base. When Int. is Off, the handset can’t receive intercom from
base or other registered handsets, but it can intercom to base or
other registered handsets.
c. This changing requires to entering the “Call Settings” ( MENU -4-3).
[Note] You need to key in the accurate user ID and password to perform
this feature. The default password is “0000”.
9. Any Key Answer (except and SILENT Soft Key)
10. Key-guard
a. When the keyguard is selected, all keys will be locked.
Press UNLOCK (Left) soft key followed by “＊” to release it.
b. The keyguard will be automatically enabled once returning back to
idle mode for 30 seconds.
11. Dialing Prefix
a. Up to 14 digits, including pause(s), one access code can be pre-
programmed to be added automatically in front of the dialed number
when dialing from call logs, phonebook, and dial-and-send dialing.
12. Call Hold
~14~
a. Places call on hold
13. Mute
a.
Press MUTE (Left) soft key during talk, the handset microphone will
be muted.
Press
UNMUTE (Left) soft key to release it.
b. Press during talk, the base microphone will be muted.
Press again to release it.
14. Phonebook
a. 50 entries, each stores a phone number or handset ID (up to 26
digits) and name (up to16 characters)
b. Alphabetically sorted display and search by letter.
c. Dial from display.
d. During the stand-by mode, you can enter the phone book by
pressing scrolling key.
e. Phone book transfer via air
i. Transfer specific phonebook to one handset or all registered
handsets
ii. Transfer all phonebooks to one handset or all registered
handsets
15. Key tone
a. Four-level key tone volume selections (Off/Low/Medium/High).
b. Four key tone type selections.
16. Call Timers
a. Display call time duration for current call during and immediately
after the call.
17. Programmable Feature Call
a. Allow user to pre-program the most frequently used Feature code
into EP801 which is adjunct to the PBX system.
b. Up to 10 entries can be saved.
c. Once the feature code is being programmed, you can quickly
perform those functions during the call by pressing OPTION soft key.
18. Menu Display
a.
To avoid mis-setup in the “Call Settings”( MENU -4), “Phone Settings”
( MENU -5), “Base Settings” ( MENU -6) and Multi-base Setting
( MENU -7-3), these settings can be hidden.
b. Password is required before enter Menu Display ( MENU -8), the