SENAO EnGenius EP-801 - Manual (Page 9)

~17~
PSTN, using this setting, user is able to review the date/time when the
caller ID received).
a. Enter MENU -6 to set Base Settings.
b. Press or scrolling key to select desired base.
c. Enter Base PIN (Default is “0000”).
d. Enter “7” to enter Set Time.
e. Enter 4 digits for MM/DD(Month/Day), then enter 4 digits for hr:mm
(Hour：Minute)
f. Press SAVE (left soft key) to finish the setting.
33. Mic Gain
Allow changing the handset microphone gain based on the handset in
different environment – Quiet, Normal and Noisy environment.
This requires entering the “Phone Settings” (
MENU -5-1).
34. Headset Ring
Allow changing the ringer emitted either from handset speaker or
receiver of headset.
This requires entering the “Phone Settings” (
MENU -5-9).
35. Baby Monitor
Allow setting the handset monitoring the baby room via intercom call.
When setting Baby Monitor ON, this dedicated handset will not answer
any incoming call, except the 2-way intercom.
This requires entering the “Call Settings” (
MENU -4-5).
~18~
Base Illustration