Roland SP-555 - Manual (Page 45)

45
About CompactFlash
Never insert or remove a CompactFlash card while this unit’s
power is on. Doing so may corrupt the unit’s data or the data
on the CompactFlash card.
1. Switch off the SP-555’s power.
2. Remove the memory card cover.
3. Insert the CompactFlash card in the front panel card
slot.
4. Attach the memory card cover.
Carefully insert the CompactFlash card all the way in–until it is
firmly in place.
If you’re using a CompactFlash card for the first time, you must
format it using the SP-555. The SP-555 will not recognize a
CompactFlash card that was formatted by another device.
1. Switch off the SP-555’s power.
2. Remove the memory card cover.
3. Push the eject button located beside the front panel
card slot. The CompactFlash card will pop out partially.
Grasp the CompactFlash card and pull it out toward
yourself.
4. Attach the memory card cover.
When you format a CompactFlash card, all data on that card
will be erased.
1. While holding down [CANCEL], press [REMAIN].
BANK [C/G]–[F/J] will blink, and the display will
indicate “FMt.”
2. Press any one of the BANK [C/F]–[F/J] buttons.
BANK [C/F]–[F/J] will change from blinking to lit, and
[DEL] will blink.
If you decide not to format the card, press [CANCEL].
3. Press [DEL].
[DEL] will light, and formatting will begin.
During the formatting process, the dot in the display will
blink.
When the blinking stops, formatting is complete.
Never turn off the power while the dot is blinking. Doing so
may damage the CompactFlash card, rendering it unusable.
Don’t modify or delete the files or folders that are created
when a CompactFlash card is formatted. The SP-555 will not
recognize the card correctly if you do so.
Inserting and removing
CompactFlash cards
Inserting a CompactFlash card
Removing a CompactFlash card
Formatting a CompactFlash card
(initializing)
SP-555_e.book 45 ページ ２００７年６月２５日 月曜日 午前９時９分