Mfx bank a – Roland SP-555 User Manual

Page 55

Advertising
background image

55

Appendix

MFX bank A

Number

Type

CTRL 1 function (display)

CTRL 2 function (display)

CTRL 3 function (display)

1

FLANGER

DEPTH (dPt)

RATE (rAt)

FEEDBACK (Fdb)

Creates modulation reminis-
cent of a jet airplane taking
off and landing.

Adjusts the depth of modula-
tion.

Adjusts the speed of modula-
tion.

Adjusts the proportion of effect
sound that is returned to the in-
put.

2

PHASER

DEPTH (dPt)

RATE (rAt)

MANUAL (MAn)

Creates modulation by add-
ing a phase-shifted sound.

Adjusts the depth of modula-
tion.

Adjusts the speed of modula-
tion.

Adjusts the pitch of the effect
sound.

3

WAH

PEAK (PEk)

RATE (rAt)

MANUAL (MAn)

Produces a wah effect.

Adjusts the width of frequencies
to which effect is applied.

Adjust the speed of modulation.

Adjusts the pitch of the effect
sound.

4

TREMOLO/PAN

DEPTH (dPt)

RATE (rAt)

WAVEFORM (trM/PAn)

Cyclically varies the volume
or panning.

Adjusts the amount of change in
volume/panning.

Adjusts the speed of volume/
panning change.

Specifies the volume/panning
modulation curve. Turn knob to
left to vary the volume, or to the
right to vary the panning.

5

REVERB

REVERB TIME (tiM)

REVERB TYPE (rM1–HL2)

3 BALANCE (bAL)

Adds reverberation to the
sound.

Adjusts the reverb time.

Selects the type of reverb.
ROOM 1 (rM1):

Short, high-density reverber-
ation.

ROOM2 (rM2):

Short, low-density reverbera-
tion.

STAGE1 (St1):

More late reverberation.

STAGE2 (St2):

More early reflections.

HALL1 (HL1):

Clear reverberation.

HALL2 (HL2):

Rich reverberation.

Adjusts the volume balance be-
tween the direct sound and ef-
fect sound.

6

TAPE ECHO

RATE (rAt)

INTENSITY (int)

BALANCE (bAL)

Simulates a tape-type echo
unit of the past.

Specifies the tape speed.

Specifies the amount of echo re-
peat.

Adjusts the volume balance be-
tween the direct sound and ef-
fect sound.

7

CHORUS

DEPTH (dPt)

RATE (rAt)

BALANCE (bAL)

Adds spaciousness and rich-
ness to the sound.

Adjusts the depth of modula-
tion.

Adjusts the rate of modulation.

Adjusts the volume balance be-
tween the direct sound and ef-
fect sound.

8

FILTER+DRIVE

CUTOFF (CoF)

RESONANCE (rES)

DRIVE (drV)

A low-pass filter with over-
drive. It cuts the high frequen-
cies and adds distortion.

Adjusts the frequency that will
be cut.

Adjusts peak frequency re-
sponse at the cutoff frequency.

Adds distortion.

9

DISTORTION

DRIVE (drV)

TONE (ton)

LEVEL (LEV)

Intensely distorts the sound.

Adjusts the degree of distortion.

Adjusts the tone.

Adjusts the volume.

10

OVERDRIVE

DRIVE (drV)

TONE (ton)

LEVEL (LEV)

Mildly distorts the sound.

Adjusts the degree of distortion.

Adjusts the tone.

Adjusts the volume.

11

FUZZ

DRIVE (drV)

TONE (ton)

LEVEL (LEV)

Adds overtones and intense-
ly distorts the sound.

Adjusts the degree of distortion.

Adjusts the tone.

Adjusts the volume.

12

OCTAVE

-2OCT LEVEL (oC2)

-1OCT LEVEL (oC1)

DIRECT LEVEL (dir)

Adds a pitch at lower oc-
taves.

Adds a pitch two octaves be-
low.

Adds a pitch one octave below.

Adjusts the volume of the direct
sound.

SP-555_e.book 55 ページ 2007年6月25日 月曜日 午前9時9分

Advertising