V-link settings – Roland SP-555 User Manual

Page 53

Advertising
background image

53

About V-LINK

You can set or edit the following functions that are related to V-LINK. With the exception of the pad mode, make the setting and
then press [SAMPLING] to save the setting.

Devices such as the Edirol PR-50/80 use only V-LINK Ctrl Ach.

*1 For details on the functions that can be controlled, refer to

“Functions that you can control using CTRL 1–3 and D Beam”

(p. 52).

V-LINK settings

Function

Value (display indi-
cation)

Operation

Remarks

Pad mode

Clip/Palette
(“CLP”, “PLT”)

[V-LINK] + [EFFECT MEMORY]

Fixed at Clip at power-on.

V-LINK Ctrl
Ach

1 – 16
(“C. 1”–“C.16”)

[CANCEL] + [V-LINK]

Bank[A]

CTRL 3 knob (can also change using
pad [1]–[16])

Specifies the MIDI channel that will control section A of mo-
tion dive .tokyo. The factory setting is channel 4.

V-LINK Ctrl
Bch

1 – 16
(“C. 1”–“C.16”)

[CANCEL] + [V-LINK]

Bank[B]

CTRL 3 knob (can also change using
pad [1]–[16])

Specifies the MIDI channel that will control section B of motion
dive .tokyo. The factory setting is channel 10.

V-LINK Ctrl
Cch

1 – 16
(“C. 1”–“C.16”)

[CANCEL] + [V-LINK]

Bank[C/G]

CTRL 3 knob (can also change us-

ing pad [1]–[16])

Specifies the MIDI channel that will control the MIDI Note
plug-in of motion dive .tokyo. The factory setting is channel 9.

CTRL 1 Assign
(*1)

Off, 1 – 30
(“oFF”, “ 1”–“30”)

[CANCEL] + [V-LINK]

Sw below

CTRL 1

CTRL 3 knob

Assigns a V-LINK function to CTRL 1. The factory setting is 4
(Speed Knob).

CTRL 2 Assign
(*1)

Off, 1 – 30
(“oFF”, “ 1”–“30”)

[CANCEL] + [V-LINK]

Sw below

CTRL 2

CTRL 3 knob

Assigns a V-LINK function to CTRL 2. The factory setting is 2
(ColorEQ Back).

CTRL 3 Assign
(*1)

Off, 1 – 30
(“oFF”, “ 1”–“30”)

[CANCEL] + [V-LINK]

Sw below

CTRL 3

CTRL 3 knob

Assigns a V-LINK function to CTRL 3. The factory setting is 6
(Cross Fader).

D Beam As-
sign (*1)

Off, 1 – 30
(“oFF”, “ 1”–“30”)

[CANCEL] + [V-LINK]

[SYNTH]/

[FILTER]/[TRIGGER]

CTRL 3 knob

Assigns a V-LINK function to D Beam. The factory setting is 1
(ColorEQ Fore).

Seq Ach Ctrl
Pad Bank

Off, Bank A – J
(“off”, “b. A”–“b. J”)

[CANCEL] + [V-LINK]

Bank[D/H]

CTRL 3 knob

Of the pad information included in the pattern data, the infor-
mation of the specified bank will be used to control section A
of motion dive .tokyo. The factory setting is bank A.

Seq Bch Ctrl
Pad Bank

Off, Bank A – J
(“off”, “b. A”–“b. J”)

[CANCEL] + [V-LINK]

Bank[E/I]

CTRL 3 knob

Of the pad information included in the pattern data, the infor-
mation of the specified bank will be used to control section B
of motion dive .tokyo. The factory setting is bank B.

Seq Cch Ctrl
Pad Bank

Off, Bank A – J
(“off”, “b. A”–“b. J”)

[CANCEL] + [V-LINK]

Bank[F/J]

CTRL 3 knob

Of the pad information included in the pattern data, the infor-
mation of the specified bank will be used to control the MIDI
Note plug-in of motion dive .tokyo. The factory setting is bank
C.

V-LINK Sw
Mode

Standerd, MD-P1
(“Std”, “MdP”)

[CANCEL] + [V-LINK]

[FIXEDVE-

LOCITY]

CTRL 3 knob

Specifies what will happen when V-LINK is turned on/off.
With the “Standard” setting, only a V-LINK On/Off message
will be transmitted. With the “MD-P1” setting, a Reset Ctrl Pa-
rameters message will be transmitted when V-LINK is turned
on, and a message that sets Total Fader to 0 will be transmit-
ted when V-LINK is turned off. The factory setting is MD-P1.

SP-555_e.book 53 ページ 2007年6月25日 月曜日 午前9時9分

Advertising