HP Impresora multifunción HP LaserJet serie M5025 - Manual (Página 153)

9. Vuelva a conectar los cables y encienda el dispositivo.
Connect the fax accessory to a phone line
When connecting the fax accessory to a phone line, ensure that the phone line that is being used for
the fax accessory is a dedicated line that is not used by any other devices. In addition, this line should
be an analog line because the fax will not function correctly if it is connected to some digital PBX systems.
If you are not sure whether you have an analog or digital phone line, contact your telecom provider.
Nota HP recomienda utilizar el cable telefónico que se entrega con el accesorio de fax, a fin
de garantizar que el accesorio funcione correctamente.
1. Locate the phone cord that is included in the fax accessory kit. Connect one end of the phone cord
to the fax-accessory phone jack on the formatter. Push the connector until it clicks.
PRECAUCIÓN Be sure to connect the phone line to the fax-accessory phone jack , which
is near the bottom of the formatter. Do not connect the phone line to the HP Jetdirect LAN
port, which is closer to the top of the formatter.
2. Connect the other end of the phone cord to the phone jack on the wall. Push the connector until it
clicks or until it is securely seated. Because different types of connectors are used in different
countries/regions, the connector might not make an audible click.
ESWW Fax analógico 141