Dell PowerEdge VRTX - Manual (Página 27)

Removing The Shared PERC 8 Card
PRECAUCIÓN: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the system.
PRECAUCIÓN: The Shared PERC 8 cards are not hot-swappable. Do not remove or install the
Shared PERC 8 cards from the system board while the PowerEdge VRTX system is powered on.
To remove the Shared PERC 8 card:
1. Push down the two release levers at the edge of the Shared PERC 8 card to disengage the card from
the storage-controller card holder.
2. Orient the card so that the other end of the card disengages from the storage-controller card holder
on the system board.
PRECAUCIÓN: When removing or replacing the Shared PERC 8 card, hold the card by its
edges. Do not handle the card while holding the battery or the heatsink.
27