Last trigger report, Nuisance prevention (npc) – Viper 5902 User Manual

Page 41

Advertising
background image

38

© 2009 Directed Electronics. All rights reserved.

Table of Zones

Zone # (led flashes) Zone

Name

1

Trunk

2

Shock Sensor

3

Door

4

Optional Sensor

5

Ignition

6

Hood

Last Trigger Report

The Last Trigger report displays the two most recent alarm triggers
depending on the system state when requested. When disarmed, the
report will display screens for the two most recent Alarm Zone triggers
since the vehicle was last driven. When armed, the report will display
screens for two most recent Alarm Zone triggers since the system was
armed.

Note

The last trigger report clears when ignition is turned on.

Nuisance Prevention (NPC)

NPC monitors all alarm zones and, if any are triggered excessively,
bypasses them until corrected. If a point of entry (trunk, hood, door)
is left open following a forced entry, it is bypassed. It becomes active
again only after being closed.

Sensors that trigger excessively are bypassed and reported to the

remote via Sensor Status icon in the Status Screen, and by NPC On
screens that are displayed during the Disarm Trigger and Last Trigger
reports.

Bypassed sensors automatically reset after one hour and after the

vehicle is driven. Disarming then re-arming the alarm does not reset
bypassed sensors.

Advertising