Programming – Viper 5902 User Manual
Page 54
1-W
ay
51
© 2009 Directed Electronics. All rights reserved.
ton for 3 seconds. The remote flashes the LED and beeps once or
twice to indicate the selected Car is 1 or 2, release the button for Car
Select or continue to hold for programming.
Release the
button, then press and release while the LED and
beeps continue to perform Car Select. Once the car is selected a com-
mand can be performed by pressing one of the command buttons.
* See
System Expansion Options
for more details .
Programming
To enter; hold the
button for 8 seconds, the remote emits one long
beep and turns the LED on, the programming main menu has been
accessed.
To exit; press and release the
button to go back and repeat to exit.
1 short and 1 long beep is emitted for each step back, the LED turns
off when programming is exited.
Sensor Adjust
The
button is used for sensor adjustment, to avoid unintended
alarm triggers, it is recommenced that an authorized Directed
dealer perform all sensor adjustments.
Remote Features menu
Press and release the
button, 2 LED flashes and beeps indi-
cate the remote features menu is accessed and can be set. Press
buttons indicated below, 1beep and flash turns the feature on, 2
beeps and flashes turns the feature off.
Autolock feature: Press
s
to turn on/off.
Remote Beeps: Press
s
to turn on/off.
Car 2 feature: Press
s
to turn on/off.