Structure of the mt4x – Yamaha MT4X Manual del usuario
Página 8
Introducción
3
Guía del Usuario
Structure of the MT4X
The MT4X can be divided into three basic sections – the mixer, the recorder, and the bus
lines which connect them:
Mixer
The mixer has four input channels. It adjusts the input signals at each respective channel
and sends them to the bus lines.
The signals input to each channel of the mixer can be switched to either input signals
(MIC/LINE) or playback signals (TAPE). When TAPE is selected, the playback signal from
each track is input to the corresponding channel. The tone of the signal is adjusted
through the equalizer and the volume at the channel faders. It is then sent to the bus lines
using the ASSIGN keys and PAN control.
Bus Lines
There are four main bus lines (group buses) which receive the input signals from each
respective channel of the mixer. If signals from two or more input channels are sent to a
bus line, these signals are overlaid or mixed.
There is also a STEREO bus (L, R), an AUX bus (1, 2), and a CUE bus.
Recorder
The signals from the bus lines are recorded by the cassette recorder. It also sends the signal
to the TAPE OUT connectors and back to the mixer (including the CUE bus).