Comandos compatibles con pjlink, Apéndices, Español – Optoma EH415 Manual del usuario
Página 79

79
Español
Apéndices
Command
Description
Remark (Parameter)
Config-URL
Device’s IP address
LAN IP address is shown up if
LAN IP address is valid.
Wireless LAN IP address is
shown up if Wireless LAN IP
address is valid.
xxx/index.html
Revision
The revision must follow a major.
minor.micro scheme. The revision
is only increased if the command
protocol is modified.
1.0.0
• Para la resolución de pantalla panorámica (WXGA), la compatibilidad
depende de los modelos de los ordenadores/equipos portátiles.
• Esta función AMX sólo es compatible con AMX Device Discovery.
• La información de transmisión sólo se envía a través de la interfaz
válida.
• Se pueden admitir al mismo tiempo la interfaz de red LAN y red LAN
inalámbrica.
• Si se utilizó “Beacon Validator”. Tenga en cuenta la siguiente
información.
Comandos compatibles con PJLink™
La siguiente tabla muestra los comandos para controlar el
proyector a través del protocolo PJLink™.
Descripción de comandos (parámetro)
Command
Description
Remark (Parameter)
POWR
Power control
0 = Standby
1 = Power on
POWR?
Inquiry about the
power state
0 = Standby
1 = Power on
2 = Cooling down
3 = Warming up
INPT
INPT Input switching
11 = VGA1
N
ote
N
ote