Digi-Star EZ 3600V Manual USB - Manual (Página 35)

Hacer listado con números de acceso directo
warning indicating that the weighing
or OFF.
time based on time or on the
one single revolution of the mixing
ingredient amount) to accept the
before automatically advancing to
should enter the user ID to use the
adjust the recipe amount.
to be loaded.
advance to the next ingredient when
fed.
32 D3715-ESP Rev E EZ3600 Manual del Usuario
Setting
[display]
Access
Nº
Options [displayed]
(bold=default)
Description
MENU 3. CALIBRATION SETTINGS WEIGHING INDICATOR
DISPLAY UNIT
[lb-kg]
303 LB/KG Display in lb or kg.
MENU 4. PRESET, RECIPE & COUNTER FUNCTIONS
PREALARM
[P MTHD] & [P-ALM]
401
WEIGHT
PERCNT
Select WEIGHT or PERCNT and
enter a value to activate an early
indicator is reaching the preset
amount.
SIREN
[BUZZER]
404 1-4, ON/OFF
Switching the loud alarm signal ON
TIMER/COUNTER
[TMRCTR]
421
REV.
TIME
Determination of the recipe mixing
number of mixing auger revolutions.
DRIVE RATIO
[DRATIO]
422 0001.00
The number of input impulses (PTO
revolutions), which correspond with
auger.
TOLERANCE
[TOLER]
442 OFF, 5,1-5,7,10
The tolerance (percentage of the
ingredient.
INGR. ADVANCEDELAY
[DELAY]
443
MANUAL, 1-3,5,7,
10,20,30,60
The number of seconds the
weighing indicator should wait
the next ingredient.
USER ID
[USERID]
446 ON/OFF
If this setting is ON, the operator
weighing indicator.
RESIZING RECIPE.
[RESIZE]
448 ON/OFF
If this setting is ON, the operator can
RECIPE TOTAL
[RECTOT]
451 ON/OFF
Displayed total weight of the recipe
TOLERANCE OVERLOCK
[OVERLK]
453 ON/OFF
If this setting is ON, the weighing
indicator does not automatically
exceeding the set tolerance.
FEED ZONE
[FDZONE]
454 ALL, 1-9
The feed zone of the groups to be