BT Freestyle 2500 - Manual (Page 36)

BT Freestyle 2500 – Edition 05 – 12.12.03 – 5301
Keep a note of your remote access
code by writing it in the space
provided on page 46.
Time saver
If you have set the answer delay to
Time Saver, your answering
machine will answer after 2 rings if
you have new messages. If you do
not have new messages it will
answer after 6 rings. This enables
you to hang up if you hear more
than 2 rings before you are
connected, saving you the cost of
a call. See Answer delay, page 31.
You can operate your answering machine remotely from
any Touchtone™ phone by calling your BT Freestyle 2500
and entering a 3-digit security code.
The pre-set code is 321. You can change this for added security.
To change the security code
1. Press and hold . The first digit of your current security
code is announced and will flash on the message counter.
2. Use or to change the digit then press to
confirm. The new digit is announced.
3. You will be prompted to change digit 2 and 3. Follow the
procedure above for all 3 digits of your security code.
4. The new security code is announced once the change has
been completed.
Switch answering machine on
If you forget to switch on your answering machine, you
can do it from another phone.
1. Dial your phone number and after 20 rings your
answering machine will switch on.
PIN Set
ᮤ
ᮤ
PIN Set
36
Remote access
5301 BT Freestyle 2500 UG [5] 22/1/04 8:41 am Page 36