BT Freestyle 2500 - Manual (Page 31)

BT Freestyle 2500 – Edition 05 – 12.12.03 – 53011
Answer delay
Answer delay sets the number of times your BT Freestyle
2500 will ring before the answering machine picks up
your call. The default setting is 6 rings. You can change
this setting to 2-9 rings or to time saver mode.
At the base:
1. Press and hold until the current setting is
announced (setting flashes), then release.
2. Press to scroll through the settings, which are
announced with each press.
When you hear and see on the message counter the
setting you want, release
. The setting is announced
again as confirmation.
Check answer delay setting
1. Press and release , the current setting is announced
and displayed.
ᮤ
ᮤ
ᮤ
ᮤ
31 Answering machine
Time Saver
Time Saver can save you the cost
of a call when you want to ring in to
find out if you have new messages.
If your answering machine answers
after 2 rings, you have new
messages. If you have no new
messages it will answer after 6 rings.
So if you hear a third ring, you can
hang up before you are connected,
saving you the cost of a call.
5301 BT Freestyle 2500 UG [5] 22/1/04 8:41 am Page 31