Admin > reboot, Admin > factory defaults, Admin > server logs – Linksys BUSINESS SERIES SRW224G4 User Manual

Page 67: Chapter 5, Advanced configuration

Advertising
background image

Chapter 5

Advanced Configuration

60

WebView Switches

Admin > Reboot

The Reboot screen resets the device. The device
configuration is automatically saved before the device is
rebooted.

Admin > Reboot

Admin > Factory Defaults

The Factory Reset screen allows network managers to
reset the device to the factory defaults shipped with the
switch. Restoring factory defaults results in erasing the
configuration file.

Admin > Factory Defaults

NOTE:

Restoring the factory defaults will

erase all configuration settings that you have
made. You can save a backup of your current
configuration settings from Admin > Save
Configuration.

Admin > Server Logs

The Server Logs screen contains information for viewing
and configuring the Remote Log Servers. New log servers
can be defined, and the log severity sent to each server.

Admin > Server Logs

Server

Specifies the server to which logs can be sent.

UDP Port

Defines the UDP port to which the server logs

are sent. The possible range is 1–65,535. The default value
is 514.

Facility

Defines a user-defined application from which

system logs are sent to the remote server. Only one facility
can be assigned to a single server. If a second facility level
is assigned, the first facility is overridden. All applications
defined for a device utilize the same facility on a server.
The field default is Local 7. The range is Local 0–Local 7.

Description

Provides a user-defined server description.

Minimum Severity

Indicates the minimum severity from

which logs are sent to the server. For example, if Notice
is selected, all logs from a Notice severity and higher are
sent to the remote server.

Use the Add to List button to add the Server Log
configuration to the Server Log Table at the bottom of the
screen.

Advertising