Linksys BUSINESS SERIES SRW224G4 - Manual (Page 33)

Chapter 5 Advanced Configuration
26 WebView Switches
Select Ports
Ports Displays the ports that are members of the selected
LAG.
Port Management > LACP
You can use the Link Aggregation Control Protocol (LACP)
to link aggregate ports into link aggregation port groups.
Each group is comprised of ports with the same speed, set
to full-duplex operation.
Port Management > LACP
You can manually set up aggregated links or automatically
establish them by enabling LACP on the relevant links. The
LACP screen contains fields for configuring LACP LAGs.
LACP System Priority The global LACP priority value.
The possible range is 1–65,535. The default value is 1.
Port The port number to which timeout and priority
values are assigned.
LACP Port Priority The LACP priority value for the port.
The field range is 1–65,535.
LACP Timeout Administrative LACP timeout. A short or
long timeout value can be selected. Long is the default.
Admin Key A channel will only be formed between ports
having the same admin key. This only applies to ports
located on the same switch.
VLAN Management > Create VLAN
The Create VLAN screen provides information and global
parameters for configuring and working with VLANs.
VLAN Management > Create VLAN
Single VLAN
VLAN ID (2–4094) The ID number of the VLAN being
configured. Up to 256 VLANs can be created. This field is
used to add VLANs one at a time. To add the defined VLAN
ID number, click Add.
VLAN Name The user-defined VLAN name.
VLAN Range
VLAN Range The range of VLANs being configured. To
add the defined range of VLAN ID numbers, click Add
Range.
VLAN Table
The VLAN Table displays a list of all configured VLANs. The
VLAN ID, VLAN Name, and status of the VLAN are displayed
here. To remove a VLAN, click Remove.
NOTE: VLANs that are created dynamically
using GARP VLAN Registration Protocol (GVRP)
are assigned a VLAN name “Undefined.”