Setup > time, Set time, Local time – Linksys BUSINESS SERIES SRW224G4 User Manual

Page 29: Daylight saving, Sntp servers, Set time local time daylight saving sntp servers, Chapter 5, Advanced configuration

Advertising
background image

Chapter 5

Advanced Configuration

22

WebView Switches

Click Save Settings to save your changes. Click Cancel
Changes
to cancel your changes.

Setup > Time

The Time screen allows you to configure the time settings
for the Switch.

Setup > Time

Set Time

Use System Time

Select this option to use the local

hardware clock.

Use SNTP Time

Select this option to synchronize the

time to an SNTP (Simple Network Time Protocol) server.

Local Time

Hours

Enter the two-digit hour here.

Minutes

Enter the two-digit minutes here.

Seconds

Enter the two-digit seconds here.

Month

Enter the two-digit month here.

Day

Enter the two-digit day here.

Year

Enter the last two digits of the year here (for example,

08 instead of 2008).

Time Zone

Select your time zone from the drop-down

menu. Time zones are identified by the difference between
Greenwich Mean Time (GMT) and local time.

Daylight Saving

Daylight Saving

Select Daylight Saving to enable it on

the Switch. If the Switch should use US daylight savings,
then select USA. If the Switch should use EU daylight
savings, then select European. If it should use another
kind of daylight savings, then select Custom and complete
the From and To fields.

Time Set Offset

For non-US and European countries,

specify the amount of time for daylight savings. The
default is 60 minutes. The range is (1–1440).

From

If you selected Other for the Daylight Saving setting,

enter the date and time when daylight savings begins.

To

If you selected Other for the Daylight Saving setting,

enter the date and time when daylight savings ends.

Recurring

If you selected Other for the Daylight Saving

setting and daylight savings has the same start and end
dates and times every year, select Recurring.

From

If you selected Recurring, enter the date and time

when daylight savings begins.

To

If you selected Recurring, enter the date and time

when daylight savings ends.

SNTP Servers

Server1

Enter the primary SNTP server here.

Server2

Enter a secondary SNTP server here.

SNTP Polling Interval (60–86400 sec)

Specify the

amount of time (in seconds) before the Switch polls the
SNTP server. The default value is every 1024 seconds
(approx. 17 minutes).

Click the Save Settings button to save your changes or
click Cancel Changes to discard the information.

Advertising