Ubicación de carteles de seguridad super star, Speed boss – Smithco Super Star 42-000-F Operator Manual Manual del usuario
Página 5

4
Ubicación de carteles de seguridad Super Star
RECUERDE: Si se han dañado o retirado carteles de seguridad o si están ilegibles o si se han
reemplazado piezas sin calcomanías, se deben colocar nuevas calcomanías. Su distribuidor
autorizado o fábrica le puede proveer nuevas calcomanías.
25-352-P
By-pass V
alve
This valve should be completely closed
when running the unit. The valve is closed
by turning clockwise. This valve can be
opened to push the unit when the engine
is not running.
Towing the Machine
The machine can be moved for a short
dist
ance with the engine of
f, but we
do not
recommend this as a st
andard procedure. When
towing
do not
tow the machine faster than
2-3 MPH (3-5 km/h) because the drive system
may be damaged.
The tires may lock up if the
machine is towed too fast. If this occurs, stop
towing the machine. If the machine must be
moved a considerable dist
ance, transport it on
a truck or trailer
.
Speed Boss
by
Speed Boss allows the machine to
operate at a proper speed while
raking bunkers on golf courses.
This speed has been factory set at an
average speed of 3-4 MPH (5-6.5 kph).
It may be re-set to any desired
operating speed. See Manual for
instructions.
CAUTION
: When the rear rake
attachment is lowered while the
machine is in forward motion, the
forward speed of the machine will
slow drastically. Operator should be
prepared for rapid change in speed.
U.S. Patent # 5,725,068 25-337-P