Philips Solución de limpieza Jet Clean - Manual

1 2 3 4
5 6 7 8
Jet Clean Solution
HQ200
Introduction
There are two types of washing machines:
Jet Clean I (Fig. 1)
Jet Clean II (Fig. 2)
Filling instruction Jet Clean I
1 Remove the cleaning fluid container from the washing machine.
(Fig. 3)
2 Remove the dosing cap from the fluid container.
(Fig. 4)
3 Unscrew the cap from the bottle with cleaning fluid, remove the airtight
seal and screw the cap back onto the bottle.
4 Fill the container with HQ200 cleaning fluid and tightly screw the dosing cap
back onto the container.
5 Place the cleaning fluid container back into the washing machine in such a way
that the top and front of the container are properly aligned with the housing
of the washing machine. (Fig. 5)
Filling instruction Jet Clean II
1 Simultanuously press the release buttons on both sides of the cleaning
chamber (1) and lift the washing machine off the cleaning chamber (2). (Fig. 6)
The cleaning chamber remains behind.
2 Unscrew the dosing cap from the bottle with cleaning fluid and remove the
airtight seal.
3 Fill the cleaning chamber with HQ200 cleaning fluid up to the MAX indication.
(Fig. 7)
4 Place the washing machine back onto the cleaning chamber. (Fig. 8)
Make sure the release buttons snap into place.
,
-
-
EnglIsh