haier AB422BCBAA - Manual (Page 14)

SET
MODE FAN SWING
TEMP
CLOCK
TIMER
SET
SLEEP
FILTER RESET
RESET
ON/OFF
HEAT
5
6
12
Then confirm the Timer mode is the
TIMER ON-OFF mode.
At this time the
* *
will flash. *
5.Set the TIMER OFF time
Press the TIME button, the adjustment method is the same as the one of setting TIMER
ON time.
ON
Before using TIMER function, calibrate the clock first.
1.Turn on the unit
After turning on the unit, set the desired
working mode.
The LCD will show working mode.
The power indicator light on the indoor unit will
light up.
2.Set of TIMER mode
Press the TIMER button to change the TIMER mode,
each press the TIMER mode will change as the
following sequence:
* Each press, the set time increases 10 minutes. If depress the button, the time will
increase rapidly.
* Each press, the set time decreases 10 minutes. If depress the button, the time will
decrease rapidly.
3.
Set the TIMER ON time
Press the time adjusting button
4.Confirm the time
After adjusting time, press SET button to confirm time.
At this time, the
* *
will not flash,
* *
begins to flash.
The time displayed is: at x oíclock x minutes the unit will be turned on.
ON OFF
6.Confirm the time of TIMER OFF
After adjusting time, press SET button to confirm time.
At this time, the
* *
will not flash.
The time displayed is: at x oíclock x minutes the unit will be turned off.
OFF
OFF ON OFF ON
AM
PM
AM
PM
TIMER ON TIMER OFF TIMER ON-OFF
Blank
Operation instruction Timer On-Off function
This LCD will show the time set, the time can be adjusted within 24h.
*
AM stands for morning, PM stands for afternoon
*
Cancel TIMER: Press the TIMER button several times until the TIMER mode
display disappears.
According to the sequence of TIMER ON & TIMER OFF setting, you can realize turning
on unit first, then turning off unit.