Epson Stylus CX3200 - Manual (Page 9)

(3621 6W\OXV &;
 (3621 6W\OXV &; 
4. The images you scan are saved to the folder listed in the
Location box. To change the folder, click the Choose
button and select the folder you want.
5. The files are named with the prefix img . To change the
prefix, enter a different three-character name in the Prefix
box.
6. The files are saved in the JPEG (*.jpg) file format. You can
select the TIFF, Multi-TIFF, or PICT format from the
Type drop-down menu instead.
Note:
For details on the available settings, click the Help button.
7. Open the File menu and click Select Scanner . You see this
window:
8. Select EPSON TWAIN 5 and click Select . (You need to
perform steps 7 and 8 only the first time you run EPSON
Scan to File.)
9. Click Next on the File Save Settings screen. After a
moment, you see this screen:
10. EPSON TWAIN begins scanning your image in Full Auto
Mode. Wait for scanning to finish.
To stop the scan and select settings in manual mode, click
Cancel . Then click the Manual mode button on the next
screen. You see the EPSON TWAIN settings dialog box.
Note:
For detailed information on EPSON TWAIN, click the Help button.
11. When scanning finishes, EPSON Scan to File saves your file
to the location you selected. It’s ready to open in a
compatible image editing program, print, e-mail, or use as
you like.
Cleaning the Print Head
If your printouts are unexpectedly light, or dots or lines are
missing, you may need to clean the print head. This unclogs the
nozzles so they can deliver ink properly. Print head cleaning
uses ink, so clean it only if quality declines.
Note:
You can also use a printer software utility to clean the print head right
from your computer. Select the ? or Help button on your printer
settings window for instructions running the utility.
1. Make sure the EPSON Stylus CX3200 is turned on but not
printing, and the Error light is off. (If the Error light is
flashing or on, you may need to replace an ink cartridge; see
“Replacing an Ink Cartridge” on page 10 for details.)
2. Press a Menu button until you see Head Cleaning on the
LCD screen.
3. Press the Color Copy button.
Cleaning takes about 30 seconds, during which the Stylus
CX3200 makes some noise and the
On light flashes briefly.
Caution:
Never turn off the EPSON Stylus CX3200 while the On light is
flashing, unless the Stylus CX3200 hasn’t moved or made noise for
more than 5 minutes.
4. When the On light stops flashing, run a nozzle check to
confirm the print head nozzles are clean.
Make sure paper is loaded, press a Menu button until you
see Nozzle Check on the LCD screen, and press the Color
Copy button. The nozzle check pattern prints.
Note:
You can also use a printer software utility to print a nozzle check right
from your computer. Select the ? or Help button on your printer
settings window for instructions running the nozzle check utility.
5. Examine the nozzle check pattern you print. It should look
something like this:
Each staggered line should be complete, with no gaps in the
dot pattern. If your printout looks okay, you’re done.
If you see any gaps in the dot pattern, clean the print head
again.
6. When you’re finished, press the Stop button.