Black & Decker Linea Pro HD450 - Manual (Página 15)

13 12
• While sanding use horizontal and vertical movements. Avoid circular movements. Never sand on edges, this
may cause damage to sand paper as well as rubber disc.
DOUBLE INSULATION
The tool is double insulated. This means that all the external metal parts are electrically insulated from the main
power supply. This is done by placing insulation barriers between the electrical and mechanical components
making it necessary for the tool to be earthead (grounded).
NOTE: Double insulation does not take the place of normal safety precautions when operating the tool. The
insulation system is for added protection against injury resulting from a possible electrical insulation failure within
the tool.
EXTENSION CABLES - Up to 30m (100 ft.) of 3 core extension cable can be used with undue loss of power.
NOTE: An extension cable should not be used unless absolutely necessary. If the use of an extension cable is a
must, make sure it is properly wired, contains the correct rated fuse as recommended in its literature and is in
good electrical condition.
TECHNICAL DATA
The level of sound pressure of the tool is in accordance with U.L. legislation. It is recommended that you take
appropriate measures for the protection of your hearing if the sound level seems uncomfortable. The normally
equates to a sound pressure in excess of 85db (A).
ACCESSORIES
The performance of your tool depends on the accessory used. Black & Decker and Piranha accessories are
engineered to high quality standards and designed to enhance the performance of your tool. By using these
accessories you will get the very best from your tool.
MAINTENANCE
Your tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool care and regular cleaning.
WARNING: Before performing any maintenance, switch off and unplug the tool.
• Regularly clean the ventilation slots in your tool using a soft brush or dry cloth.
• Regularly clean the motor housing using a damp cloth. Do not use any abrasive or solvent-based cleaner.
PROTECTING THE ENVIRONMENT
Separate collection.
This product must not be disposed of with normal household waste.
Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do
not dispose of it with household waste. Make this product available for separate collection.
WRONG
ENGLISH ENGLISH
Separate collection of used products and packaging allows materials to be recycled and used again.
Re-use of recycled materials helps prevent environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
SERVICE INFORMATION
Black & Decker offers a full network of company-owned and authorized service locations. All Black & Decker
Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool
service. Whether you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker
location nearest you.
SPECIFICATIONS
HD450 HD500 HD550
VOLTAGE
AR 220V ~ 50Hz 220V ~ 50Hz 220V ~ 50Hz
B2C 220V ~ 50Hz 220V ~ 50Hz 220V ~ 50Hz
B3 120V ~ 60Hz 120V ~ 60Hz 120V ~ 60Hz
POWER 500W 550W 550W
NO-LOAD SPEED 0-2800 rpm 0-2800 rpm 0-2800 rpm