Minka Group F563-SP-BS/DW - Manual (Página 22)

SYMPTOM
Fan Wobble
NOTE: All blade sets are grouped by weight. Because wood and
plastic blades vary in density, the fan may wobble even though
blades are matched.
Make sure outlet box is secured to building structure, if necessary
use the wood screws provided to further secure outlet box to joist.
Make sure hanger bracket is secure to the outlet box, screws are
tight.
Use the balancing kit provided if the wobble is excessive (follow
instructions included with balancing kit)
SYMPTOM
Fans/Light Turn On and Off Unexpectedly
This is caused by interference, change the code frequency from the
transmitter, and follow the instructions from Section 5 again to
operate your transmitter and fan.
SYMPTOM
Lights shut off and will not come back on.
This unit is equipped with a wattage limiting device. Lamping in
excess of 190 watts will disable your ceiling fan’s light kit. To reset
your light kit you must turn the power off and re lamp, keeping the
wattage under 190 watts. Restore power to your ceiling fan and
continue normal operation.
SOLUTION
SOLUTION