JVC KD-AVX44 - Manual (Page 74)

ENGLISH
72
Symptoms Remedies/Causes
USB playback
• “Now Reading...” keeps flashing on the
monitor.
• Readout time varies depending on the USB device.
• Do not use too many hierarchy, folders and empty
folders.*
* Folder that is physically empty or folder that contains
data but does not contain valid MP3/WMA/WAV/AAC
track.
• Turn off the power then on again.
• Do not pull out or connect the USB device repeatedly
while “Now Reading...” is displayed on the monitor.
• Correct characters are not displayed (e.g.
album name).
For available characters, ☞ page 68.
• While playing a track, sound is sometimes
interrupted.
The tracks have not been properly copied into the USB
device. Copy tracks again into the USB device, and try
again.
Bluetooth
• Bluetooth device does not detect the unit. • Search from the Bluetooth device again.
• Reset the unit. When “Open...” appears on the monitor,
search from the Bluetooth device again.
• The unit does not make pairing with the
Bluetooth device.
• Enter the same PIN code for both the unit and target
device. If the PIN code of the device is not indicated on
its manuals, try “0000” or “1234.”
• Phone sound quality is poor. • Reduce the distance between the unit and the Bluetooth
cellular phone.
• Move the car to place where you can get a better signal
reception.
• The sound is interrupted or skipped while
using a Bluetooth audio player.
• Reduce the distance between the unit and the Bluetooth
audio player.
• Disconnect the device connected for Bluetooth phone.
• Turn off, then turn on the unit.
• (When the sound is not yet restored,) connect the device
again.
• The connected audio player cannot be
controlled.
Check whether the connected audio player supports AVRCP
(Audio/Video Remote Control Profile).
• The unit does not response when you tried to
copy the phone book to the unit.
You may have tried to copy the same entries (as stored) to
the unit. Touch BAND to exit.
• “No Audio Device” appears on the monitor. Connect this unit and the Bluetooth audio player correctly.
• “No Voice Device” appears on the monitor. The connected cellular phone does not have the voice
recognition system.
EN_KD-AVX44[E]ff.indb 72 EN_KD-AVX44[E]ff.indb 72 08.1.18 8:07:55 PM 08.1.18 8:07:55 PM