Welch Allyn REF 29400 User Manual

Page 31

Advertising
background image

Welch Allyn OAE Hearing Screener Directions for Use 705353 Rev E

30

Chapter 9: Printing Previously Collected Data – Single
Ear


The AC power supply must be connected to the back of the printer and plugged into an outlet. The
printer must be powered ON using the ON/OFF switch. When using the serial label printer, be
sure to have it plugged into the screener serial port before you print.

To print out the results on a serial printer, it must be connected to the screener using the special
cable provided with the printer before you select the test for printing. The cylindrical RS232
connector end of this cable should be aligned and plugged securely into the receptacle labeled
IOIOI on the left side of the screener. The other end of this cable is a RJ12 connector that is
commonly seen on telephone cords. It should be connected into the corresponding receptacle of
the serial printer.

This flow chart begins at the point where the PERFORM DPOAE message is displayed and
shows the program flow for instances in which you wish to print data that is stored in memory.




























The PRINT ALL UNPRINTED TESTS feature is intended for use when multiple tests are stored in
memory and the user wishes to print out all of them at one time. Every test that is stored in
memory that has not been printed before will be printed if the DX SELECT button is pressed when
the PRINT ALL UNPRINTED TESTS message is displayed. If the intent is only to print individual
tests, bypass the PRINT ALL UNPRINTED TESTS message by pressing the DOWN arrow button
until the PRINT BOTH EARS RESULTS is displayed on the LCD. The first individual test

PERFORM DPOAE

Log # in logbook

VIEW DPOAE

RESULTS

PRINT TEST

RESULTS

V

^

V

^

PRINT ALL

UNPRINTED DATA

DX SELECT

DX SELECT

Printing of selected
test(s). Print All
Unprinted Data
prints all tests in
memory that have
not been printed
previously.

Printer detected?

TURN PRINTER ON

TRY AGAIN

DX SELECT

V

XXXX-R/L

PASS/REFER PRINT

DX SELECT

^

or V

next/previous
test

No

Yes

Advertising