Linksys KiSS DP-600 - Manual (Página 35)

261
english
THIS PRODUCT UTILIZES A LASER BEAM WHICH CAN CAUSE HAZARDOUS RADIATION
EXPOSURE IF THIS PRODUCT IS USED INCORRECTLY. BE SURE TO FOLLOW THESE DIRECTIONS
FOR PROPER USE. DO NOT OPEN COVER AND DO NOT REPAIR OR SERVICE YOURSELF. REFER
SERVICING TO QUALIFIED PERSONNEL.
Using controls, making adjustments, or performing procedures, other than those
specifi ed herein, may result in hazardous radiation exposure. Do not open covers
and do not repair unit yourself. Refer servicing to qualifi ed personnel.
To reduce the risk of fi re, electric shock, or product damage, do not expose this
apparatus to rain, moisture, dripping, or splashing, and take care that no objects
fi lled with liquids, such as vases, are placed on this product.
Do not install or place this unit in a bookcase, built-in cabinet, or other confi ned
space. Do not obstruct the unit’s ventilation openings with newspapers, tablecloths,
curtains or similar items. Ensure the unit is well-ventilated to prevent risk of
electrical shock or fi re hazard due to overheating.
Do not place sources of naked fl ames, such as lighted candles, on this unit. Dispose of batteries
in an environmentally friendly manner.
THE FOLLOWING APPLIES ONLY TO THE U.S.A. AND CANADA
- To prevent electric shock, match wide blade of plug to wide slot and fully insert. If the plug that
comes with this unit does not fi t into your electrical outlet, consult an electrician.
FOR THE MIDDLE EAST, SOUTH AFRICA, AND ASIA
- This unit is intended for use in tropical climates.
FOR AUSTRALIA AND NEW ZEALAND
- This unit is intended for moderate climates.
This product may receive radio interference caused by mobile telephones during use. If such
inference occurs, increase the distance between the product and the mobile telephone.
DANGER: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.
AVOID DIRECT EXPOSURE TO BEAM. (FDA 21 CFR)
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.
AVOID EXPOSURE TO BEAM. (IEC60825-1)
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that into which the receiver
is
connected.
• Consult the dealer or an experienced radio/TV technician for assistance.
Any unauthorized changes or modifi cations to this equipment will void the user’s authority to
operate this device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
THE FOLLOWING APPLIES IN THE U.S.A. AND CANADA:
FOLLOW THE SAFETY INSTRUCTIONS ON THE UNIT AND SAFETY PRECAUTIONS LISTED BELOW.
Keep these operating instructions handy for future reference.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install according to the manufacturer’s instructions.
Do not defeat the purpose of the polarized grounding type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blades or the third prong are provided for your safety. If the provided plug does not fi t
your outlet, consult an electrician for a replacement of the obsolete outlet.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus,
including amplifi ers, that produce heat.
Protect the power cord from being walked on or pinched, particularly at the plugs, convenience
receptacles, and the point at which they exit from the apparatus.
Only use the attachments/accessories specifi ed by the manufacturer.
CAUTION - The socket-outlet shall be installed near the equipment and shall be easily acces-
sible.
Use only with a cart, stand, tripod, bracket, or table specifi ed by the manufacturer
or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to
avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of a time.
Refer all servicing to qualifi ed personnel. Servicing is required when the apparatus has been dam-
aged in any way, such as when a power supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, or the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
OUTDOOR USE WARNING
To reduce the risk of fi re or electric shock, do not expose this apparatus to rain or moisture.
This apparatus must not be used outdoors
18
Important Safety Instructions
This symbol is intended to alert the user to the presense of uninsulated “dangerous
voltage” within the product’s enclosure that may be of suffi cient magnitude to consi-
titute a risk of electric shock to persons.
The symbol is intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the appliance.
The laser product label has not been attached to products for the U.S.A. and Canada.