For your safety, En-775e, Using the right power cord – Envision Peripherals EN-775e User Manual

Page 4: General features, Package contents

Advertising
background image

EN-775e

4

31MY02

EN-775e

For Your Safety

General Notes

Do not install the monitor near heat sources
such as radiators or air ducts.

Do not place monitor in direct sunlight or in
areas with excessive dust, mechanical vibration
or shock.

Save the original shipping carton and packing
materials in case you need to ship your monitor.
Be sure to repackage your monitor as it was
originally packed at the factory.

Periodically clean your monitor with a soft cloth.
Stubborn stains may be removed with a cloth
lightly dampened with a mild detergent solution.
Never use strong solvents such as thinners,
benzene, or abrasive cleaners, since these
will damage the cabinet
. Always unplug the
monitor before cleaning it.

Using the Right Power Cord

The supplied power cord is a NEMA 5-15 style
plug. It is UL-listed and CSA labeled for
125 volts AC.

If the monitor will be connected to your computer’s
power outlet, use a minimum No. 18 AWG, type
SJT or SVT three conductors cord with one end
terminating with a male grounded plug, rated 10A,
250V, CEE-22. The other end must terminate with
a molded-on type connector body, rated 10A,
250V, having standard CEE-22 female
configuration.

General Features:

17" (43.2 cm) Color Monitor

Crisp, Clear Display for Windows

Supports Resolutions up to 1280 X 1024 pixels
@60Hz

EPA ENERGY STAR

®

Package Contents

The box that your monitor was shipped in should
have included the following items:

1. EN-775e Color Monitor

2. Power Cord

3. Quick Start Guide

4. Booklet

(containing Warranty and Safety information)

Advertising