Electrolux EWW 12480 W User Manual

Page 12

Advertising
background image

12 electrolux use

Cottons Economy

(Economia)

Drying

(Secado): Cottons

(Algodón), Synthetics (Sintéticos).

The selector dial can be turned either
clockwise or anticlockwise. Position O to
Reset programme/ Switching OFF of the
machine.

At the end of the programme the
selector dial must be turned to
position O, to switch the machine off.

Attention!
If you turn the programme selector dial
to another programme when the
machine is working, the red
Start/Pause pilot light will flash 3 times
and the message Err will appear on the
display to indicate a wrong selection.
The machine will not perform the new
selected programme.

Programme Option buttons

Depending on the programme, different
functions can be combined. These must
be selected after choosing the desired
programme and before depressing the
Start/Pause (Inicio/Pausa) button.
When these buttons are pressed, the
corresponding pilot lights come on.
When they are pressed again, the pilot
lights go out.

Select the temperature

Press this button repeatedly to increase
or decrease the temperature, if you

90º
60º

40º

30º

Temp.

want your laundry to be washed at a
temperature different from the one
proposed by the washer-dryer.

Maximum temperatures are 90°C for
cottons, 60°C for synthetics and easy
iron, 40°C for delicates, wool and
handwash, 30°C for silk , while
corresponds to cold wash.

Select the Spin Speed, No Spin or
Rinse Hold option

Press this button repeatedly to change
the spin speed, if you want your laundry
to be spun at a speed different from the
one proposed by the washer-dryer.

The relevant light will light up.

Maximum speeds are:

for Cottons: 1200 rpm;

for Handwash and Wool: 1000 rpm;

for Synthetics, Easy iron: 900 rpm;

for Delicates, Silk: 700 rpm.

No Spin

option eliminates all the

spinning phases and increases the
number of rinses for some pro-
grammes.

Rinse Hold

: by selecting this

option the water of the last rinse is not
emptied out to prevent the fabrics from
creasing.
When the programme has finished, the
Start/Pause button light goes off, the
display shows 3 flashing zeros «

0.00

»

1200

900
700

Centrifug.

132970420_GB.qxd 02/08/2007 15.26 Pagina 12

Advertising