Introduction to bluetooth, Pairing, Automatic connection – Clarion BLT370 User Manual

Page 13

Advertising
background image

13

BLT370

Automatic Connection

The

Bluetooth

®

wireless function in your phone has to be turned on to establish

automatic connection.
1. The Transceiver will establish an automatic connection in the following

situations:
• After a previously successful connection, and the Transceiver is switched

on again, it will automatically try to re-connect with the last paired mobile

phone (Depends on multiple re-connection mode). Connection may take

up to a minute depending on the mobile phone.
• Some mobile phones will require user confirmation for

Bluetooth

®

connection. In such case, user will need to acknowledge the connection

on the mobile phone before the connection is re-established.

2. The Transceiver will not establish an automatic connection or fail to connect

in the following situations:
• If the mobile phone already has connection with other handsfree/

headset
• If the paired mobile phone is powered off and on (depends on mobile

phone)
• If the paired mobile phone is out of range
• If the paired mobile phone is powered on after the Transceiver is turned

on where multiple re-connection mode set to off.

In such cases, the user will need to manually re-connect to the Transceiver

through the mobile phone.

Note:

• If the Transceiver is switched off, some mobile phones may take a long time to

detect the disconnection.

4. INTRODUCTION TO

BLUETOOTH

®

“PAIRING”

1EN_OM_Receiver BLT370.indd 13

8/15/07 3:10:36 PM

Advertising