How to use your remote transmitter – Bulldog Security 1402 User Manual

Page 12

Advertising
background image

‘ ‘

‘

‘

24

HOW TO USE YOUR

REMOTE TRANSMITTER

CONT.

VALET MODE

To activate Valet Mode, first disarm the system. Hold Button #4 for ten (10)

seconds and the system will chirp once. Press Button #4 again within two (2)

seconds and the system will chirp once again. The LED will remain on when

in valet mode. To deactivate the valet mode, repeat the above steps, however,

the system will chirp twice when Button #4 is pressed the second time.
LED STATUS INDICATOR

LED STATUS

VIOLATED ZONE

Armed

LED flashes slowly

External Sensors 3 Flashes

Disarmed

LED off

Door Switches

5 Flashes

Passive Arming Flashing fast

Ignition

6 Flashes

Valet

ON

OVERRIDE SWITCH

If the remote control is lost, this switch allows you to disarm your system.

First open the door and turn the ignition ON, then press the override switch.
SHOCK SENSOR

To activate the Shock Sensor, disarm the system, then press Button #4 for

ten (10) seconds. The system will chirp once. Press Button #2 within two (2)

seconds and the system will chirp once again. To deactivate the shock sensor,

repeat the steps above, except the system will chirp twice after Button #2

is pressed.
LOCK/UNLOCK WITH IGNITION

To activate locking and unlocking with the ignition, disarm the system, then

press Button #3 for ten (10) seconds. The system will chirp once. Press Button

#2 within two (2) seconds, and the system will chirp once. To deactivate this

feature, repeat the steps above, except the system will chirp twice after Button

#2 is pressed. When this feature is active, the system will lock the doors five

(5) seconds after the ignition is turned on. The system will unlock the doors

immediately when the ignition is turned off.
DOOR LOCK PULSE

The Door Lock Pulse length choices are 0.7 seconds and 3.5 seconds. To

program the 3.5 second pulse length, press Button #3 for ten (10) seconds

and the system will chirp once. Press Button #1 within two (2) seconds and

the system will chirp once again. To program the 0.7 second pulse length,

repeat the above steps, except there will be two (2) chirps after pressing

Button #1.

23

HOW TO USE YOUR

REMOTE TRANSMITTER

CONT.

PASSIVE ARMING

To activate Passive Arming, disarm the system, then hold Button #3 for ten

(10) seconds. The system will chirp once. Press Button #3 again within two

(2) seconds. The system will chirp once to indicate that passive arming is now

programmed. To deactivate passive arming, hold Button #3 for ten seconds

until one chirp occurs. Press Button #3 again and two (2) chirps will occur,

indicating that all passive arming functions are disabled.
If passive arming is programmed, the system will automatically arm itself 60

seconds after the ignition is turned off.
If the ignition is turned on or the door is opened, the passive arm countdown

period begins and remains reset until the ignition is turned off and the door

closed. If the ignition is turned on then off, the passive arming remains reset

and the LED off until a door is opened and closed. Chirps will occur 30 seconds

before the passive arming activates.
SHOCK LOCK

If passive arming without door locking is programmed, the doors will

automatically lock when a shock violation occurs. They will remain

locked until 60 seconds after the violation has ended. The doors will

then automatically unlock.
HIGH THEFT

To activate the High Theft feature, press Button #2 within 2 seconds after

arming. The system will chirp once (or flash if silent arming is active) indicating

the acceptance of this feature.

If high theft is programmed, the system will emit one chirp every 30 seconds

while armed.
SHOCK DISABLE

To shut the shock sensor off for this arming period, press Button #1 again

after arming and one (1) chirp (or flash) will occur.
REMOTE CAR STARTER (Negative Out #1 on Pin 10 of the Harness)

Press Button #2 while the system is armed or disarmed, the parking lights

will light, and the connected accessory will be activated. As long as Button

#2 is pressed, a ground signal is applied to the accessory and the parking

lights will stay on. To use for remote start, it may be connected to output 1

or 2. However, the unit must be disarmed (doors unlocked) before remote

starting. After the car is running, the doors can be relocked.

Advertising