Brother IntelliFax-2820 User Manual

Page 100

Advertising
background image

Troubleshooting and routine maintenance

11 - 12

11

Transmission Verification Report
says ‘RESULT:NG’ or
‘RESULT:ERROR’.

There is probably temporary noise or static on the line. Try sending the fax again.

If you send a PC FAX message and get ‘RESULT:NG’ on the Transmission
Verification Report, your machine may be out of memory. To gain extra memory,
you can turn off Fax Storage (See Turning off Remote Fax Options on page 6-4),
print fax messages in memory (See Printing a fax from the memory on page 4-5)
or cancel a Delayed Fax or Polling Job (See Canceling a fax in progress on page
3-8)
. If the problem continues, ask the telephone company to check your phone
line.

If you frequently get transmission errors due to possible interference on the phone
line, try changing the Compatibility setting to Basic. (See Compatibility on page
11-20.
)

Vertical black lines when sending.

If the copy you made shows the same problem, your scanner is dirty.
(See Cleaning the scanner glass on page 11-22.)

Handling Incoming Calls

The machine ‘Hears’ Voice as CNG
Tone.

If Easy Receive is set to On, your machine is more sensitive to sounds. It may
mistakenly interpret certain voices or music on the line as a calling fax machine
and respond with fax receiving tones. Deactivate the machine by pressing
Stop/Exit. Try avoiding this problem by turning Easy Receive to Off. (See Easy
Receive
on page 4-3.
)

Sending a Fax Call to the machine.

If you answered at the machine, press Start and hang up immediately. If you
answered on an external or extension phone, press your Fax Receive Code
(default setting is (

51). When your machine answers, hang up.

Custom features on a single line.

If you have Call Waiting, Call Waiting/Caller ID, RingMaster, Voice Mail, an
answering machine, an alarm system or other custom feature on a single phone
line with your machine, it may create a problem sending or receiving faxes.

For Example: Your Brother machine handles the Caller ID subscriber services.
However, if you subscribe to Call Waiting or some other custom service and its
signal comes through the line while your machine is sending or receiving a fax, the
signal can temporarily interrupt or disrupt the faxes. Brother’s ECM feature should
help overcome this problem. This condition is related to the telephone system
industry and is common to all devices that send and receive information on a
single, shared line with custom features. If avoiding a slight interruption is crucial
to your business, a separate line with no custom features is recommended.

Menu Setting Difficulties

The machine beeps when you try to
access the Setup Receive and
Setup Send menus.

If the Fax

key is not illuminated, press it to turn on Fax mode. The Setup

Receive setting (Menu/Set, 2, 1) and Setup Send setting (Menu/Set, 2, 2) are
available only when the machine is in Fax mode.

Copy Quality Difficulties

Vertical streaks appear in copies.

Sometimes you may see vertical streaks on your copies. Either the scanner or the
primary corona wire is dirty. Clean them both. (See Cleaning the scanner glass on
page 11-22, Cleaning the laser scanner window on page 11-22
and Cleaning the
drum unit
on page 11-17.
)

DIFFICULTY

SUGGESTIONS

Advertising
This manual is related to the following products: