Directorio Marcas AOC L26W861
English: + Русский: - Deutsch: - Español: - Français: - Italiano: -

Manual de servicio AOC - L26W861

background image

6

Páginas:
Descargar Quejarse

Contenido del Manual

  • p. 1/43
    6
  • p. 2/43
    TABLE OF CONTENTS FOR YOUR SAFETY …………………………………………………….... 2 PRCAUTIONS AND REMINDERS ………………………………………. 4 IMPORTANT SAFETY INSTRUCTIONS ……………………………….. 6 Package Contents ………………………………………………… 8 Attaching the Base ………………………………………………… 8 Preparing Your LCD HDTV
  • p. 3/43
    1 SYMBOL SYMBOL DEFINITION SA 1965 DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of
  • p. 4/43
    2 FOR YOUR SAFETY Before operating the TV please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested
  • p. 5/43
    3 DIGITAL TELEVISION TRANSITION NOTICE This device contains a digital television tuner, so it should receive digital over the air TV programming, with a suitable antenna, after the end of full-power analog TV broadcasting in the United States on February
  • p. 6/43
    4 Place unit on even surfaces. Don't place the TV in confined spaces or in a box when using it. Unplug immediately if is malfunction like no picture, no video/audio,smoke and bad odor from TV. Unplug immediately if other foreign materials are put inside
  • p. 7/43
    5 Remember to unplug the AC cord from the AC outlet before cleaning. Do not use liquid cleaners or aerosol cleaners to clean the display. Avoid direct sunlight, dusty, high humidity and smoky areas. Make sure to unplug the unit when not in use for a long
  • p. 8/43
    6 Read before operating equipment 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any of the ventilation openings.
  • p. 9/43
    7 18. Tilt/Stability – All televisions must comply with recommended international global safety standards for tilt and stability properties of its cabinets design. y Do not compromise these design standards by applying excessive pull force to the front,
  • p. 10/43
    8 Package Contents ◎AOC L26W861 TV unit ◎Remote Control ◎Two (AAA) Batteries for the Remote Control ◎Base ◎Three screws (to attach the Base to the stand) ◎Power Cord ◎User Manual ◎Quick Setup Guide IMPORTANT: Do not apply pressure to the screen display area
  • p. 11/43
    9 Preparing Your LCD HDTV for Wall Mounting We suggest that you keep your TV at least 2.36 inches (60 mm) from the wall to prevent cable interference. Before mounting your TV on the wall, you need to remove the base. To attach a wall mount bracket to your
  • p. 12/43
    10 Please, make sure to connect the power plug to the wall outlet socket after connecting the TV to the power cord! 1 . Install the base stand; place the TV on a solid surface. Ensure that the TV is placed in a position to allow free flow of air. Do not
  • p. 13/43
    11 3. Remote control: Remove the cover of the battery compartment. Insert the 2 batteries supplied (Type AAA 1.5V). 4. Power: Insert the power cord in the wall socket having an AC power supply. You can see LED states at the front panel. If the LED color
  • p. 14/43
    12 HDMI S-Video Composite Pr Pb Y PC Line in 15-pin D-Sub PERIPHERAL CONNECTION GUIDE AC POWER
  • p. 15/43
    13 1. HDMI – Connect the primary source for digital video such as a DVD multimedia player or set top box through this all digital connector. The white color band on the rear of the TV indicates this connection. 2. RGB PC – Connect the video and audio cables
  • p. 16/43
    14 TO USE THE FRONT PANEL CONTROL 1 VOL + VOL +: Press to increase the sound volume level. 2 VOL - VOL - : Press to decrease the sound volume level. 3 CH ▲ CH +: Press to select the next higher Program number. 4 CH ▼ CH - : Press to select the next lower
  • p. 17/43
    15 TO USE THE REMOTE CONTROL POWER Press to power ON/OFF (standby) TV.(Note:1.TV is never completely power off. unless physically unplugged. 2.Press to turn on TV after the power on status LED had changed to the red color and stopped flashing. ) VIDEO Press
  • p. 18/43
    16 VIEWING MODES ILLUSTRATIONS Normal Mode on 16:9 Display screen The original content would be at the center of the screen. Wide Mode on 16:9 Display screen The original content in this mode has to fill the entire width of the display horizontally. Wide
  • p. 19/43
    17 ZOOM Mode on 16:10 Display screen For those wide format images which are originally programmed into 4:3 frames with top and bottom black bars, this mode has to stretch the image in both wide and high directions to the full display with active data. Little
  • p. 20/43
    18 CONNECTING EQUIPMENT Coaxial (RF) Using Your Antenna or Digital Cable for DTV 1. Turn off the power to the HDTV. 2. Connect the coaxial (RF) connector from your antenna or digital cable (out-of-the-wall, not from the Cable Box) to the ANTENNA/CABLE DIGITAL/ANALOG
  • p. 21/43
    19 Using the Antenna or Cable for your VCR 1. Turn off the power to the HDTV and VCR. 2. Connect the “Output to TV”, “RF Out” or “Antenna Out” connector on the rear of your VCR to the ANTENNA/CABLE DIGITAL/ANALOG connector at the rear of the HDTV. 3. Turn
  • p. 22/43
    20 Connecting Your HDTV Set-Top Box Using HDMI HDTV Set-Top Boxes that have a HDMI digital interface should be connected to the HDMI input of the LCD HDTV for optimal results. Connecting your HDTV Set-Top Box (Best) 1. Turn off the power to the HDTV and
  • p. 23/43
    21 For HDTV Set-Top Boxes with DVI 1. Turn off the power to the HDTV and HDTV Set-Top Box. 2. Using a HDMI-DVI cable, connect the DVI end to your HDTV Set-Top Box and the HDMI end to the HDMI Input at the rear of the HDTV. 3. Turn on the power to the HDTV
  • p. 24/43
    22 HDTV Set-Top Box and connect the other end to the audio connectors associated with the Component. 6. Turn on the power to the HDTV and HDTV Set-Top Box. 7. Select Component (Video 3) using the INPUT button on the remote, side of the HDTV or directly by
  • p. 25/43
    23 Using Coax (RF) 1. Turn off the power to the HDTV and Set-Top Box. 2. Using a Coax (RF) cable, connect one end to the TV OUT (RF) on your Set Top Box and the other end to the DTV/TV input at the rear of the HDTV. 3. Turn on the power to the HDTV and Set-Top
  • p. 26/43
    24 Connecting Your DVD Player Using HDMI DVD players that have a digital interface such as HDMI (High Definition Multimedia Interface) should be connected to the HDMI input of the LCD HDTV for optimal results. Connecting your DVD Player (Best) 1. Turn off
  • p. 27/43
    25 Using Component Video Connecting your DVD Player (Better) 1. Turn off the power to the HDTV and DVD player. 2. Connect the Pr (red color) connector on your DVD player to the corresponding Pr (red color) connector in the Component at the rear of the HDTV.
  • p. 28/43
    26 Using S-Video (AV) Connecting your DVD Player (Good): 1. Turn off the power to the HDTV and DVD player. 2. Connect the S-Video jack on the rear of your DVD player to the S-Video jack in the AV group on the rear of the HDTV. 3. Connect an audio cable (white
  • p. 29/43
    27 5. Select Composite (Video 1) using the INPUT button on the remote, side of the HDTV or directly by pressing the AV button on the Remote Control.
  • p. 30/43
    28 Connecting Your VCR or Video Camera 1. Turn off the HDTV and VCR or Video Camera. 2. Connect the S-Video jack on the rear of your VCR or Video Camera to the S-Video jack in the AV group on the rear of the HDTV. 3. Connect an audio cable (white and red
  • p. 31/43
    29 Connecting to a PC Computer 1. Turn off the power to the HDTV and PC Computer. 2. Connect a 15-pin D-Sub RGB (VGA) cable to the RGB output of your pc computer and the other end to the RGB PC input at the rear of the HDTV. 3. Connect the Audio Out on your
  • p. 32/43
    30 TO USE THE MENUS 1. Press the MENU button to display the main menu 2. Use the cursor up/down to select a menu item. 3. Use the cursor left/right to enter a submenu. 4. Press the ENTER button to enable/disable the function. 5. Press the MENU or EXIT button
  • p. 33/43
    31 6. Channel Labels: Show the NTSC / ATSC TV channel label menu for user modifying channel labels specifically. 7. Menu Language: Select the menu display language. (English / Espanol / Francais) 8. Aspect Ratio: Select the display aspect ratio. (Normal/Zoom/Wide/Cinema)
  • p. 34/43
    32 AUDIO MENU The Audio menu in TV mode shows as below. It provides audio adjustment for user to modify the audio setting. Audio language setting is only available with ATSC TV source, the option is disable under other source modes. 1.Audio Language:Change
  • p. 35/43
    33 FEATURE MENU The Feature menu in TV mode shows as below. It provides certain optional control functions such as time set, sleep timer, advanced video menu, Password Set, parental control (V-chip) and Digtal closed caption setting. This menu gives users
  • p. 36/43
    34 【3D Y/C】provides On / Off switches. The default setting is On. 【 Dynamic Contrast】user can choose 0n or Off. 【Setting】restores the default advanced video option settings. 4. Password Set: Change the 4-numeral parental control password. Three steps are
  • p. 37/43
    35 6. Digital Captions: Select the close caption options ( Service 1-6, Text 1-4 and CC 1-4) in digital TV mode. When select service 1 to service 6 you canmodulate parameters in the Digital Close Caption. 7. Digital Close Caption: Provide numerous options
  • p. 38/43
    36 【Edge Effect】: The text edge effects, which gives None / Raised / Depressed / Uniform / Left Shadow / Right Shadow modes. 【Edge Color】: The colors of text edge effects, which provides Red / Green / Blue / Yellow / Magenta / Cyan / Black / White Colors.
  • p. 39/43
    37 TIPS Care of the screen Do not rub or strike the screen with anything hard as this may scratch, mar, or damage the screen permanently. Unplug the power cord before cleaning the screen. Dust the TV by wiping the screen and the cabinet with a soft, clean
  • p. 40/43
    38 Regulatory Notices – Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
  • p. 41/43
    39 NOTE: *This model complies with the specifications listed below. *Designs and specifications are subject to change without notice. *This model may not be compatible with features and/or specifications that may be added in the future. *26” LCD TV Viewable
  • p. 42/43
    40 Please make these simple checks before calling service. These tips may save you time and money since charges for receiver installation and adjustments of customer controls are not covered under your warranty. Symptoms Items to Check and Actions to follow
  • p. 43/43
    41 GLOSSARY HDTV HDTV displays are technically defined as being capable of displaying a minimum of 720p or 1080i active scan lines. HDMI Inputs High-Definition Multimedia Interface Audio / Video Inputs Located on the rear of the receiver, these connectors