Alpine IVA-W205 User Manual

Page 77

Advertising
background image

75

-EN

01GB07IVA-W205.fm

ALPINE IVA-W205 68-08564Z41-A (EN)

Radio Antenna Receptacle

MIC Input Connector

To Microphone (sold separately).

Video Input Connector (AUX INPUT) (Yellow)

Input the video.

Audio Input Connectors (AUX INPUT)

RED is right and WHITE is left input the audio.

Video Output Connector (AUX OUTPUT) (Yellow)

Output the video.

Audio Output Connectors (AUX OUTPUT)

RED is right and WHITE is left output the audio.

Remote Control Output Lead (White/Brown)

Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.

Remote Control Input Lead (White/Brown)

Connect the external Alpine product to the remote control
output lead.

Reverse Lead (Orange/White)

Use only when a back-up camera is connected. Connect to
the plus side of the car’s reverse lamp that lights when the
transmission is shifted into reverse (R).
Switches the video picture to the back-up camera. This is
linked with putting the car into reverse (R).

Monitor Control Lead (White/Pink)

Connect this to the Monitor Control Lead of the touch panel-
compatible rear monitor.

RCA Extension Cable (sold separately)

Remote IN/OUT Connector

FULL SPEED™ Connection Cable (KCE-422i) (sold
separately)

GPS Antenna Receptacle

To GPS Antenna (sold separately).

Steering Remote Control Interface Connector

To steering remote control interface box.
For details about connections, consult your nearest Alpine
dealer.

iPod Direct Connector

iPod control signals.
Connect this to an iPod or an optional Bluetooth Box, using
the FULL SPEED™ Connection Cable (KCE-422i) (sold
separately).
To use a hands-free mobile phone, an optional Bluetooth
Box connection is required. For details on connection, refer
to the Owner’s Manual of the Bluetooth Box.

CAMERA Input Terminal

Use when connecting a back-up camera.

RGB Input Terminal

Connect this to the RGB output terminal of the Navigation
System.

TMC Antenna Receptacle

To TMC Antenna (sold separately).

Digital Output Terminal (Optical)

Use when combining fiber optic digital input compatible
products.

Ai-NET Connector

Connect this to the output or input connector of another
device (CD Changer, Equalizer, HD Radio™ TUNER
MODULE, etc.) equipped with Ai-NET.

You can input TV/video sound by connecting an optional

Ai-NET/RCA Interface cable (KCA-121B) to this component.

Rear Output RCA Connectors

RED is right and WHITE is left.

Front Output RCA Connectors

RED is right and WHITE is left.

Subwoofer RCA Connectors

RED is right and WHITE is left.

System Switch

When connecting an equalizer or divider using Ai-NET
feature, place this switch in the EQ/DIV position. When no
device is connected, leave the switch in the NORM position.

Be sure to turn the power off to the unit before changing the switch

position.

Power Supply Connector

Ai-NET Cable (Included with CD Changer)

Remote Turn-On Lead (Blue/White)

Connect this lead to the remote turn-on lead of your
amplifier or signal processor.

Power Antenna Lead (Blue)

Connect this lead to the +B terminal of your power antenna,
if applicable.

This lead should be used only for controlling the vehicle’s power

antenna. Do not use this lead to turn on an amplifier or a signal
processor, etc.

Audio Interrupt In Lead (Pink/Black)

Parking Brake Lead (Yellow/Blue)

Connect this lead to the power supply side of the parking
brake switch to transmit the parking brake status signals to
the IVA-W205.

Foot Brake Lead (Yellow/Black)

Connect to the vehicle’s foot brake lead or brake lamp lead.

Switched Power Lead (Ignition) (Red)

Connect this lead to an open terminal on the vehicle’s fuse
box or another unused power source which provides (+)
12V only when the ignition is turned on or in the accessory
position.

Battery Lead (Yellow)

Connect this lead to the positive (+) post of the vehicle’s
battery.

Fuse Holder (10A)

Ground Lead (Black)

Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.

Right Front (+) Speaker Output Lead (Gray)

Right Front (–) Speaker Output Lead (Gray/Black)

Right Rear (–) Speaker Output Lead (Violet/Black)

Right Rear (+) Speaker Output Lead (Violet)

Left Rear (+) Speaker Output Lead (Green)

Left Rear (–) Speaker Output Lead (Green/Black)

Left Front (–) Speaker Output Lead (White/Black)

Left Front (+) Speaker Output Lead (White)

01GB00IVA-W205.book Page 75 Wednesday, January 24, 2007 5:11 PM

Advertising