Radio, Listening to the radio, Presetting stations manually – Alpine IVA-W205 User Manual

Page 15: Presetting stations automatically

Advertising
background image

13

-EN

01GB05IVA-W205.fm

ALPINE IVA-W205 68-08564Z41-A (EN)

Display example for FM Radio main screen

[SOURCE] button: Refer to page 11
[VISUAL] button: Displays the VISUAL selection screen
[SETUP] button: Displays the SETUP selection screen
Displays the preset number/frequency

This unit cannot receive HD Radio™ signals (digital terrestrial radio).
In order to activate the digital radio functions described below, an
optional HD Radio Tuner module must be connected through the Ai-
NET bus.

Listening to the Radio

1

Touch [SOURCE] on the main source screen.

The SOURCE selection screen is displayed.

Receiving Analog Radio:

2

Touch [RADIO].

The radio mode is activated and the display changes to the
Radio Mode screen.

Receiving HD Radio (if TUA-T500HD is connected):

2

Touch [HD RADIO].

The digital radio mode is activated and the display changes
to the HD Radio Tuner Mode screen.

3

Touch [BAND] to select the desired radio band.

Each press changes the bands as follows:

4

Touch [TUNE] to choose the tuning mode.

Each touch changes the tuning mode display.

There are two modes you can select for auto tuning, DX and

Local:

- DX (Distance) mode (with DX SEEK indicator ON);

Both strong and weak stations will be tuned in.

- Local mode (with SEEK indicator ON);

Only strong stations will be tuned in.
The initial setting is DX.

5

Touch [

], [

] or [

], [

] to change the

radio frequency up or down respectively.

In manual mode, touch and hold to change the frequency
continuously.

“DIGITAL” is displayed when a digital radio station is received.
Refer to “Digital SEEK Setting (HD Radio mode only)” on page 33.

Presetting Stations Manually

1

Tune in a desired radio station you wish to store in
the preset memory by manual or automatic seek
tuning.

2

Touch [P1/2]

*

to change the function guide.

* [P 1/3] is displayed in the HD Radio mode.

3

Touch and hold any one of the preset buttons
[P.SET 1] through [P.SET 6] for at least 2 seconds.

The selected station is stored.

4

Repeat the procedure to store up to 5 other stations
onto the same band.

To use this procedure for other bands, simply select the
desired band and repeat the procedure.

A total of 18 stations can be stored in the preset memory
(6 stations for each band; FM1, FM2 or AM).

If a preset memory has already been set in the same preset number, it

will be cleared and the new station will be memorized.

Presetting Stations Automatically

The tuner can automatically seek and store 6 strong stations in the
selected band in order of signal strength.

After selecting the desired band, touch [A.MEMO].

The tuner automatically seeks and stores 6 strong stations into
[P.SET 1] to [P.SET 6] in order of signal strength.
When the automatic storing has been completed, the tuner goes
to the station stored in [P.SET 1].

If no stations are stored, the tuner will return to the original station

you were listening to before the automatic storing procedure began.

Radio

FM-1

FM-2

AM

FM-1

Distance

Local

Manual

Distance

01GB00IVA-W205.book Page 13 Wednesday, January 24, 2007 5:11 PM

Advertising