AASTRA 6757i CT RP - Manual (Page 38)

32 Model 6757i CT RP Phone Installation Guide
Other Phone Features (6757i CT RP Handset)
Other Phone Features (6757i CT RP Handset)
Adjusting the Volume
Receiver Volume
When on a call and while not in any edit mode, the handset’s receive
volume can be adjusted using the volume control bar located on the side of
the handset. The display feedback is a speaker facing the right side of the
display with a rectangular box on the right side of the speaker. This box
indicates the relative volume of the receiver volume:
lb
Alerter Volume
The volume control bar is also used to adjust the alerter volume while the
set is idle or while the set is alerting (ringing).
The alert volume icon indicates that the alerter volume is shown while the
volume bar shows the relative volume:
¬c
. The volume levels range
from off (
¬e
) to full volume (
¬a
)
Handset Status Light (LED)
The multifunction Handset LED provides the following user feedback:
Alerter Tones
The 6757i CT RP cordless handset uses tones to provide information as
follows:
Handset LED Status Description
Slow Flash
Indicates you have a message(s).
Rapid Flash Indicates an alerter tone is in progress. (See next
paragraph).
Intermittent Flash Indicates the phone is set on "mute".
Intermediate Flash Indicates the call is on hold.
ON solid Indicates you are on an active call.
Handset Alerter Tones Description
Alerting Provides user selected alerter tones.
Battery Provides "Battery low" warning tone every 3
minutes.
Hold Provides "Flash ring" to notify of call on hold.