Reese 44558 PROFESSIONAL RECEIVER Manual del usuario

Installation instructions, Kia sorento, Part numbers

Advertising
background image

Installation Instructions

Kia Sorento

Part Numbers:

75516
87425
44558

Hitch Shown In Proper Position

Equipment Required:

Wrenches: 19mm

Drill Bits: None

Rev. A

9-22-06

75516N

Sheet 1 of 3

z

2006 Cequent Towing Products

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to

prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working

beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.
This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5

and SAE J684.

Fastener Kit: 75516F

Do Not Exceed Lower of Towing Vehicle

Manufacturer’s Rating or

Wiring Access Location: SUV7

Form: F205 Rev A 5-6-05

Tighten all M12 X 1.50 CL10.9 fasteners with torque wrench to 92 Lb.-Ft. (125 N*M)

Conical Toothed Washer

Qty. (4)

2

M12 X 1.50 X 40mm CL 10.9 Hex Bolt

Qty. (4)

1

1.

Raise receiver over exhaust and into position between vehicle frame rails.

2.

Install M12 X 1.50 Hex bolts and conical toothed washers into existing weldnuts.

500 (227 Kg)

5000 (2268 Kg)

Weight Carrying

Ball Mount

500 (227 Kg)

5000 (2268 Kg)

Weight Distributing

Max Tongue

WT (LB)

Max Gross

Trailer WT (LB)

Hitch type

Frame Rail

Frame Rail

Exhaust

Spare tire may need to be lowered for installation.

Fascia

Advertising