Pro Series 51141 51 Receiver - Manual

Installation Instructions
Ford Explorer Sport Trac
Part Numbers:
51141
Hitch Shown In Proper Position
Equipment Required:
Wrenches: 13/16, 7/8, 15/16
Drill Bits: None
1. Raise receiver into position and attach with fasteners as shown above.
2. Tighten all ½-13 GR5 fasteners with torque wrench to 75 Lb.-Ft. (102 N*M)
Tighten all 9/16-12 GR5 fasteners with torque wrench to 110 Lb.-Ft. (149 N*M)
Rev. A 8-3-09 51141N Sheet 1 of 3 z 2009 Cequent Performance Products
Hex Nut 9/16-12 Qty. (2) 5
Hex Nut ½-13 Qty. (2) 9 Lock Washer – 9/16” Qty. (2) 4
Conical Toothed Washer Qty. (2) 8 Spacer Block 3/8 x 1-1/2 x 2 Qty. (2) 3
Spacer Block ¼ x 1-1/2 x 2 Qty. (2) 7 Spacer Block ¼ x 1-1/2 x 2 Qty. (2) 2
Carriage Bolt ½-13 x 1-3/4 GR5 Qty. (2) 6 Hex Bolt 9/16-12 x 2-1/2” GR5 Qty. (2) 1
Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to prevent
entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working beneath a
vehicle and wear eye protection. Do not cut access or attachment holes with a torch.
This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and
SAE J684.
Fastener Kit: 51141F
Do Not Exceed Lower of Towing Vehicle
Manufacturer’s Rating or
500 (227 Kg.) 5000 (2270 Kg.)
Weight Carrying
Ball Mount
600 (272 Kg.) 6000 (2724 Kg.) Weight Distributing
Max Tongue
WT (LB)
Max Gross
Trailer WT (LB)
Hitch type
Wiring Access Location: SUV1, SUV2
Form: F205 Rev A 5-6-05
Bumper
Existing Hole
Slot in Frame
12345
6789