9 4 ) r – JVC GR-D21 User Manual

Page 31

Advertising
background image

EN

31

USING THE REMOTE CONTROL UNIT

!
@

9

4

)

r
#

● Make sure to set “S/AV INPUT” to “OFF” in the Menu

Screen (GR-D31 only,

pg. 24).

● Set the video out select switch of the cable adapter as

required:
Y/C

: When connecting to a TV or VCR which accepts

Y/C signals and uses an S-Video cable.

CVBS : When connecting to a TV or VCR which does not

accept Y/C signals and uses an audio/video
cable.

● When editing on a VCR equipped with a DV input

connector, an optional DV cable can be connected
instead of an S-Video cable and audio/video cable.

To Remote PAUSE
or R.A.EDIT

TV

To PAUSE IN

$

Editing cable***

Audio/Video cable
(provided)

*

Connect when an S-Video cable is not used.

** When connecting cables, open this cover.
*** Provided with the optional Remote Control kit

RM-V717KITU.

Connector
cover
**

To AV

*

To EDIT

(

To
S-VIDEO

)

Programme

Random
Assemble
Editing Menu

1

2
3
4
5
6
7
8

– – : – – ~

~
~
~
~
~
~
~

– –

N

I

OUT

MODE

– – : – –

0 : 00

0

TOTAL

CODE

T I ME

VCR

“Y/C”/“CVBS”
video out
select switch

If your VCR has the
SCART connector,
use the provided
cable adapter.

To AUDIO, VIDEO*
and

-IN

connectors

5

If using a Fade/Wipe at the beginning of the scene,

press FADE/WIPE

9

on the remote control.

• Cycle through the effects by pressing repeatedly, and

stop when the one you want is displayed.

6

At the beginning of the scene, press EDIT IN/OUT

@

on the remote control. The Edit-In position appears

in the Random Assemble Editing Menu.

7

At the end of the scene, press EDIT IN/OUT

@

. The

Edit-Out position appears in the Random Assemble
Editing Menu.

8

If using a Fade/Wipe at the end of the scene, press

FADE/WIPE

9

.

• Cycle through the effects by pressing repeatedly, and

stop when the one you want is displayed.

• If you select a Fade/Wipe effect for an Edit-Out point,

the effect is automatically applied to the following
Edit-In point.

• When you use Fade/Wipe effects, that time is

included in the total time.

9

If using Playback Special Effects, press EFFECT

!

(

pg. 28).

10

Repeat steps 6 through 9 to register additional

scenes.

• To change previously registered points, press

CANCEL

#

on the remote control. The registered

points disappear, one at a time, from the most
recently registered point.

• If you are not using Fade/Wipe or Programme AE with

special effects, repeat steps 6 and 7 only.

NOTES:

● When choosing a scene, set Edit-In and Edit-Out points

so that there is a relatively large difference between
them.

● If the search time for an in-point exceeds 5 minutes, the

recording deck’s Record-Standby mode will be cancelled
and editing will not take place.

● If there are blank portions before or after the Edit-In and

Edit-Out points, a blue screen may be included in the
edited version.

● Since time codes register time only as accurately as

seconds, the time code total time may not match the total
programme time exactly.

● Turning off the camcorder’s power erases all registered

Edit-In and Edit-Out points.

SELECT SCENES

4

Point the remote control at the camcorder’s remote

sensor. Press PLAY (4)

)

and then press R.A.EDIT

ON/OFF

r

on the remote control.

The Random Assemble Editing Menu appears.

S-Video cable
(optional)

Continued on next page.

GR-D31/21EK 28-33

02.12.19, 9:15 PM

31

Advertising