JVC GR-D21 User Manual

Page 28

Advertising
background image

EN

28

USING THE REMOTE CONTROL UNIT

Slow-Motion Playback

To allow slow-speed search in either direction during
tape playback.

1

To change from normal to Slow-Motion Playback,

press SLOW (9)

Y

or (0)

f

more than approx. 2

seconds. After approx. 5 minutes (approx. 20 seconds
with an 80-minute cassette) in Slow Rewind or approx.
5 minutes in Slow Forward, normal playback resumes.
Ⅲ To stop Slow-Motion Playback, press PLAY (4)

h

.

NOTES:

● You can also engage Slow-Motion Playback from Still

Playback by pressing SLOW

Y

f

more than approx.

2 seconds.

● During Slow-Motion Playback, due to digital image

processing, the picture may take on a mosaic effect.

● After SLOW (9)

Y

or (0)

f

is pressed and held, the still

image may be displayed for a few seconds, followed by a
blue screen for a few seconds. This is not a malfunction.

● There may be a small margin between the slow-motion

playback start point you chose and the actual start point
for Slow-Motion Playback.

● During Slow-Motion Playback, there will be disturbances

in video and the picture may seem unstable, especially
with steady images. This is not a malfunction.

● During Slow-Motion Playback, press PAUSE (6)

T

to

pause playback.

Playback Special Effects

To allow you to add creative effects to the playback
image.

1

To start playback, press PLAY (4)

h

.

2

Point the remote control at the camcorder’s remote

sensor and press EFFECT

d

. The PLAYBACK

EFFECT Select Menu appears.

3

Move the highlight bar to the desired effect by

pressing EFFECT

d

. The selected function is activated

and after 2 seconds the menu disappears.
Ⅲ To deactivate the selected effect, press ON/OFF

s

on the remote control. Pressing it again re-activates
the selected effect.

Ⅲ To change the selected effect, repeat from step 2

above.

NOTE:

The effects that can be used during playback are Classic
Film, Monotone, Sepia and Strobe. The effects work the
same in playback as they did in recording. Refer to page 16
for more information.

Playback Zoom

To magnify the recorded image up to 44X at any time
during playback.

1

Press PLAY (4)

h

to find the scene of interest.

2

Press the Zoom Button T

l

or W

;

on the remote

control. Make sure the remote control is pointed at the
camcorder's remote sensor. Pressing T

l

zooms in.

3

You can move the image on screen around to find a

particular portion of the picture. While holding down
SHIFT

P

, press * (Left)

U

, T(Right)

g

,

^

(Up)

T

and

&

(Down)

O

.

Ⅲ To end zoom, press and hold W

;

until magnification

returns to normal. Or, press STOP (5)

O

and then

press PLAY (4)

h

.

NOTES:

● Zoom can also be used during slow-motion and still

playback.

● Due to ditital image processing, the quality of the image

may suffer.

Make sure “REMOTE” in the SYSTEM Menu is set
to “ON” (

pg. 23) and the remote control is

pointed at the remote sensor

1

. The transmitted

beam’s approximate effective distance for indoor
use is 5m.

Press T

l

Normal playback

To move image, press T
(Right)

g

while keeping

SHIFT

P

held down.

Frame-By-Frame Playback

To allow frame-by-frame search during tape playback.

1

To change from normal to Frame-By-Frame

Playback, press SLOW (0)

f

repeatedly for forward or

SLOW (9)

Y

repeatedly for reverse. Each time it is

pressed, the frame is played back.

NOTE:

You can also engage Frame-By-Frame Playback from Still
Playback by pressing SLOW (

9

)

Y

or (0)

f

repeatedly.

9

0

2

3

4

6

w

e

5

T

W

W

E

U

R

I

Y

k

g

f

T

O

P

d

s

j

l

;

a

h

GR-D31/21EK 28-33

02.12.19, 9:14 PM

28

Advertising